Tektronix Camcorder 2200 Benutzerhandbuch
3-96
Section 3 — Menu Descriptions
Example 1 – Inserting a Pause
1.
Press the
Keyframe
button on the top menu panel or the
Time
Cursr
button on the Effects Editing panel to bring up the
Timeline Menu.
2.
Recall an empty register or one that you can write over.
3.
If in Enable Mode, enable
M/E 1
,
M/E 2
, and
Bkgd
. If in
Delegate mode, delegate
M/E 1
,
M/E 2
, and
Bkgd
.
4.
Set up a Timeline Menu similar to that shown above; that is,
with staggered keyframes on the various levels, staggered
independent timeline lengths, and a total of about 8
keyframes. We will discuss adding the pauses in a moment.
(If you don’t know how to set up these timelines and
keyframes, refer to the Effects Editing portion of your User
Guide or Operator’s manual.)
with staggered keyframes on the various levels, staggered
independent timeline lengths, and a total of about 8
keyframes. We will discuss adding the pauses in a moment.
(If you don’t know how to set up these timelines and
keyframes, refer to the Effects Editing portion of your User
Guide or Operator’s manual.)
5.
Select
DELEGATES
in the Timeline Menu if not in this mode
already.
6.
Undelegate
M/E 2
and
Bkgd
(in the above example). (Turn off
M/E
and
Bkgd
on the E-MEM panel.)
7.
Rewind the effect, then press
Next KF
to move to Keyframe 2.
8.
In the Timeline menu, undelegate the levels you do not wish
to modify, and delegate those levels you do wish to modify.
to modify, and delegate those levels you do wish to modify.
a.
Press
PAUSE/NO PAUSE
button until the desired state
appears highlighted.
b. Press
MOD
.
NOTE:
If the pause state of all delegated levels are not identical, neither
PAUSE
or
NO PAUSE
is selectable.