Tektronix Camcorder 2200 Benutzerhandbuch
![Tektronix](https://files.manualsbrain.com/attachments/8290919ac2d59d4854d7f6390d5fb3959ff4166e/common/fit/150/50/57e6c08abf656d2a0ea515316e8dc2a0925b9a4e11d84eeaf6a6a2925654/brand_logo.png)
2-18
Section 2— Control Panel Descriptions
You can use the
lever arm
in combination with the
AUTO
TRANs
button to perform a transition. You can start the
transition by moving the
lever arm
off its limit, and finish the
transition by pressing
AUTO TRANs
. The transition is
completed at a rate proportional to the rate set for a full
AUTO
TRANs
transition. For example, if the
lever arm
is moved
halfway and the transition is completed by pressing
AUTO
TRANs
at a rate of 200 frames, the remaining half of the
transition will take 100 frames.
NOTE:
The
lever arm
will be left off-limit any time you begin a
transition with the
lever arm
and finish it with
AUTO TRANs
. The
lever
arm
will not function properly again until is moved to either limit (this
action will not change the M/E output). While the
lever arm
is non-
functional, both
lever arm
direction indicators are on.