Panasonic Arbitrator 360 Bedienungsanleitung

Seite von 33
Adjust “Auto Zoom Magnification” selecting 
from “1,2,3,4,5,7,10,15, or 22” and
“Auto Zoom time” for zoom magnification 
retention time from “3,5, or 8” seconds
Adjust “Zoom Limit”, “x22” for optical  
or “x220” for digital
Select “Auto”, “Off”, “On” or “Last”
When setting “Init IR Mode” as “Auto”, 
select IR Level, “Low”, or “High”
and IR Time, “10, 30, 60 or 300”
(4) Camera Control
Auto Zoom / IR Set up
1. 
Select “CONFIG” tab of SI and enter the password* to log in.
2. 
Then,  press “CONFIG” and select “Camera”.
Press “APPLY” to apply 
the setting changes.
Enable or disable LPR 
(License Plate Recognition)
Set the level of camera input gain control
Select “Auto”, “Preset” or “Disable”
“Auto” :  Auto focus operates when 
the zoom ratio is changed.
“Preset”: Camera is focused at 50ft
when zoom ratio is 3x below.
“Disable”: Focus is locked at 130ft 
and auto focus is not available.