Technicolor - Thomson ITC250S Benutzerhandbuch

EN

Most of your television’s functions are available via the menus that appear on the screen.The remote control supplied with your set can
be used to navigate through the menus and to configure all the general settings.The remote control and its functions may vary depending
on the television model.The rest of this page contains the description of the most comprehensive remote control. Optional remote
control features are indicated by the symbol 

.

Standby / quit standby.

To access TV mode. Press this button to control the
television.

To access VCR  mode.

To access DVD mode.

 SAT

To access SAT mode.

 AUX

To access AUX mode.

 AMP

To access AMP mode.

 light

To provide information:
- it lights up when you press a button,
- it indicates the status when the remote control is
being programmed (see page 5),
- if the batteries are run down, it flashes when you
press a button.

 PIP

To enable the PIP function.

 SWAP

To swap the main picture with the PIP picture.

 PIP+/PIP-

To change programmes within the PIP function.

 ZOOM

To change the size of the PIP picture.

 FREEZE

To freeze the main picture.

 SLEEP

To access directly the 

option in the

menu.

 LIGHT

Remote control light.

(red button) sound and picture settings menu

(green button)  list of programmes

(yellow button) status information

(blue button) programme guide

(purple button) Teletext

The coloured buttons can also be used for operating Teletext.

To select menu options.

To set functions, change values, enable and disable
functions (checkbox) in menus.
To select the picture format or zoom.

To confirm a selection, enable and disable functions
(checkbox) in menus.

To access the OVERVIEW menu.

To exit the menu structure.
In PIP mode: to disable the PIP function.

To control the volume.

To switch the sound off and back on again.

To return to the previous channel/AV programme.

To change channels.

To select a channel by its number. In the case of
channel numbers with two digits:
- press the two digits quickly, or
- press 0 to display “--”, then enter the channel
number.

To select an appliance connected to an AV socket.

 DEMO

To access demo mode.

The remote control supplied with your television may vary depending on the model you have chosen. Some remote controls can be used
to control other appliances using the programmable buttons 

,

,

,

and 

.

For each button you can control the following appliances:

: video recorder

: DVD player

: satellite receiver, cable network

: hi-fi system, Home Cinema amplifier

: any appliance. For instance, if you have two video recorders, you can program the 

button to control one video recorder, and

program the 

button to control the other one.

This method can be used to automatically find the most appropriate code for your appliance.

Switch on the appliance you wish to use the remote control with.

Press the relevant button for this appliance on the remote control, and while holding this button down, press the 

standby button

until the light or the appliance buttons of the remote control come on. Release both buttons.

Point the remote control at the appliance and press 

.Wait until the light stops flashing. If the appliance has not gone into standby

mode, press the 

button again to continue the search for the next set of codes. Repeat this operation until the appliance goes

into standby mode.There are around 20 sets of codes.

When the appliance goes into standby mode, switch it on again without using the remote control. Press the 

button as many

times as is required to return the appliance to standby mode.

Press the 

button and hold it down until the light or the appliance buttons of the remote control go off.

itc250s-en  27/08/04  18:01  Page 4