Panasonic Arbitrator 360 Installationsanweisungen
E-3
2. Precautions in Handling the P2 Card in the
Personal Computer
3. Software to be Installed
The supplied CD-ROM installs the following
programs:
programs:
z
P2 driver
z
P2 card manager
z
Software for each P2 device
When the programs are installed using the
supplied CD-ROM, you are able to format
the P2 card. The P2 card can be formatted
in either of two ways:
supplied CD-ROM, you are able to format
the P2 card. The P2 card can be formatted
in either of two ways:
z
In Windows Explorer, right-click on the P2
card drive. Select “Format” from the
displayed menu.
card drive. Select “Format” from the
displayed menu.
z
In Windows Explorer, select the P2 card
drive.
From the displayed menu, select “File”,
“Removable Disk” and “Format” in that
order.
drive.
From the displayed menu, select “File”,
“Removable Disk” and “Format” in that
order.
The supplied CD-ROM also contains a set
of instruction manuals. Refer to the folder
named
of instruction manuals. Refer to the folder
named
\Manuals.
To browse instruction manuals, you need
Adobe
Adobe
®
Reader. If Adobe Reader is not
currently installed in the personal computer,
you will need to download this program
from the Adobe Web site.
you will need to download this program
from the Adobe Web site.
When using the software with the P2 card or P2 devices connected to the
personal computer, be sure to install the P2 driver on the personal
computer from the supplied CD-ROM.
personal computer, be sure to install the P2 driver on the personal
computer from the supplied CD-ROM.
If these devices are connected to a personal computer on which the P2 driver is not
installed, these devices may not operate properly.
installed, these devices may not operate properly.
Do not remove the P2 card from the slot during reading from or writing to
the P2 card. Also, do not insert or remove the USB cable or change the
setting of USB connector.
the P2 card. Also, do not insert or remove the USB cable or change the
setting of USB connector.
Otherwise, abnormal operation of the personal computer may result.
Also, perform the following operation before removing the P2 card from the card slot:
Also, perform the following operation before removing the P2 card from the card slot:
z
If the P2 card is inserted directly into the card bus in the personal computer, execute
“Safely Remove Hardware” from the system tray on the Windows taskbar.
“Safely Remove Hardware” from the system tray on the Windows taskbar.
z
If the P2 devices are connected to the personal computer via USB2.0, open My
Computer, then right-click on the particular hardware item into which the P2 card is
inserted, and select “Take Out”.
Computer, then right-click on the particular hardware item into which the P2 card is
inserted, and select “Take Out”.
z
Ensure that the personal computer system is set up in such a way that it will not go
into standby mode or hibernation mode during use of the P2 card. If the system is set
up to go into standby mode or hibernation mode while a P2 card is being accessed,
destruction of the files and/or data being executed may result.
into standby mode or hibernation mode during use of the P2 card. If the system is set
up to go into standby mode or hibernation mode while a P2 card is being accessed,
destruction of the files and/or data being executed may result.
P2Installer(VQT0L24-8)_E_F_C_J.book 3 ページ ２００８年２月１２日 火曜日 午後１時５０分