Network Technologies 2907 Benutzerhandbuch
NTI RACKMUX RACKMOUNT KVM DRAWER WITH SUN USB KEYBOARD
3
INSTALLATION
Rack Mounting Instructions
The NTI RACKMUX was designed to be mounted to a rack and includes mounting flanges to make attachment easy. Follow the
instructions included for the Accuride Model 2907 Electronic Enclosure Slide to mount the RACKMUX. Be sure to tighten all
mounting screws securely.
instructions included for the Accuride Model 2907 Electronic Enclosure Slide to mount the RACKMUX. Be sure to tighten all
mounting screws securely.
Connect The Cables
1. Connect the male 15HD video cable from the RACKMUX to a female 15HD connector on a CPU or KVM switch.
2. Connect the male USB Type A connector from the RACKMUX to an available female USB Type A connector on a CPU or
2. Connect the male USB Type A connector from the RACKMUX to an available female USB Type A connector on a CPU or
KVM switch.
Note: The video and USB ports on a KVM switch should be numbered in order to group connectors into user sets. Be
sure to connect the video and USB cables into connectors having the same set numbers.
sure to connect the video and USB cables into connectors having the same set numbers.
3. Connect the AC adapter cable to the power cable on the RACKMUX.
4. Flip up the LCD display to power-up the RACKMUX and use the keyboard, monitor, and trackball as normal.
TROUBLESHOOTING
PROBLEM:
SOLUTION:
No Display
• Make sure video cable is plugged into video source
• Make sure video cable is plugged into video source
• Make sure AC adapter cable is connected to power source
PROBLEM:
SOLUTION:
SOLUTION:
No keyboard or mouse
Make sure USB cable is fully connected to signal source
Make sure USB cable is fully connected to signal source