Keating Of Chicago 2005 Benutzerhandbuch
3
Programming
To program the timers, the unit must be in the idle
mode. Press and hold the set button for approximately
two seconds. The display will show “SEt”. Press T1, T2
or T3 for the cook time to be programmed. The display
will show the current setting for that cook time. Use the
up or down button to increment or decrement the
setting. When the setting is correct, press and hold the
set button again for approximately two seconds. The
display will show "StO" for approximately two seconds
and the timer will return to normal operation. Repeat
the process as necessary for the other timers.
mode. Press and hold the set button for approximately
two seconds. The display will show “SEt”. Press T1, T2
or T3 for the cook time to be programmed. The display
will show the current setting for that cook time. Use the
up or down button to increment or decrement the
setting. When the setting is correct, press and hold the
set button again for approximately two seconds. The
display will show "StO" for approximately two seconds
and the timer will return to normal operation. Repeat
the process as necessary for the other timers.
Operating Logic
When the timer is powered up, the display will show the
time setting for the channel that was operated last and
the relay output contacts will be open. To start a cycle,
press the desired cook time button (T1, T2 or T3). The
display will begin to countdown from the preset time
setting and the relay output contacts will close. During
the countdown the colon will flash at a one-second
rate. When the countdown has reached "00:00" the
relay output contacts will open, the display will flash,
and the audible alarm will sound. To cancel the audible
alarm, press any button.
time setting for the channel that was operated last and
the relay output contacts will be open. To start a cycle,
press the desired cook time button (T1, T2 or T3). The
display will begin to countdown from the preset time
setting and the relay output contacts will close. During
the countdown the colon will flash at a one-second
rate. When the countdown has reached "00:00" the
relay output contacts will open, the display will flash,
and the audible alarm will sound. To cancel the audible
alarm, press any button.
Pause Feature
To pause a cycle in progress, press any button. The
relay output contacts will open, the display will flash,
and the countdown will pause. To resume the
countdown, press any button. The display will resume
the normal countdown and the relay output contacts
will close.
relay output contacts will open, the display will flash,
and the countdown will pause. To resume the
countdown, press any button. The display will resume
the normal countdown and the relay output contacts
will close.
SHUTDOWN
Turn ON/OFF switch to “OFF” position.
CLEANING
PROCEDURES
PROCEDURES
A. Keating Cooking Sheets
Clean cooking sheets with a damp soft cloth after
each run of product (a Turkish towel works best).
each run of product (a Turkish towel works best).
THE COOKING HEAD WILL BE HOT. USE PROPER
CARE WHEN CLEANING THE COOKING SHEETS.
CARE WHEN CLEANING THE COOKING SHEETS.
End of day cleaning:
Before the griddle is turned off for the day, the cooking
sheets should be cleaned as described below. Wear
heat resistant gloves for maximum safety during the
entire cleaning procedure.
sheets should be cleaned as described below. Wear
heat resistant gloves for maximum safety during the
entire cleaning procedure.
1.
At the end of the day, wipe the cooking sheet in
place with a damp soft cloth. Continue wiping until
the surface of the cooking sheet is free of any residue.
place with a damp soft cloth. Continue wiping until
the surface of the cooking sheet is free of any residue.
2.
Remove the cooking sheet from the cooking head.
Clean the cooking head and the griddle surfaces.
Clean the cooking head and the griddle surfaces.
3.
Wash the cooking sheet with a mild detergent in
warm water and dry thoroughly.
warm water and dry thoroughly.
4.
If needed, after the cleaning is complete, reverse
the cooking sheet and reattach it to the cooking
head.
the cooking sheet and reattach it to the cooking
head.
B. Cooking Sheet Clips
To remove the stainless steel cooking sheet clips for
cleaning, simply lift them off. They can be cleaned in a
dishwasher.
cleaning, simply lift them off. They can be cleaned in a
dishwasher.
C. Cooking Head
The MIRACLEAN
®
surface is very durable and with
proper care, following the procedures below, will last
many years.
many years.
1.
Scrape MIRACLEAN
®
surface from front to back
with the Keating griddle scraper with Cooking
Sheets removed.
Sheets removed.
2.
Clean and polish surface with Keating Klenzer on a
damp soft cotton cloth. Wipe off excess Klenzer.
damp soft cotton cloth. Wipe off excess Klenzer.
BECAUSE OF THE SUPERIOR MIRACLEAN
®
SURFACE, THE ONLY TOOLS YOU WILL EVER NEED
TO CLEAN THE TOP-SIDE
TO CLEAN THE TOP-SIDE
™
COOKING HEAD ARE A
DAMP SOFT COTTON CLOTH AND A KEATING
SCRAPER.
SCRAPER.
NEVER SCRAPE COOKING SHEETS WITH THE
SCRAPER.
SCRAPER.
NEVER USE A
GRIDDLE STONE, BRICK,
GRIDDLE SCREEN OR HARSH CHEMICALS TO
CLEAN THE MIRACLEAN
CLEAN THE MIRACLEAN
®
SURFACE.
DAMAGE DONE TO THE MIRACLEAN
®
SURFACE
BY GRIDDLE STONE, BRICK, SCREEN, OR
HARSH CHEMICALS WILL VOID THE WARRANTY.
HARSH CHEMICALS WILL VOID THE WARRANTY.
THE DAMAGE DONE TO THE MIRACLEAN
®
SURFACE IS IRREPARABLE.
NEVER USE ICE TO COOL THE MIRACLEAN
®
SURFACE AS IT MAY WARP THE MIRACLEAN
®
SURFACE.
USE ONLY KEATING SUPPLIED CLEANING
TOOLS AND KLENZER.
TOOLS AND KLENZER.
USE ONLY
A
KEATING STEEL
SPATULA.
NOTE: Keating Klenzer MSDS Sheet available on
website, www.keatingofchicago.com
website, www.keatingofchicago.com