Eclipse - Fujitsu Ten Car Video System AVN4430 Benutzerhandbuch

Seite von 99
93
93
A slight difference in operation may be mistaken for a malfunction. Please check the items in
the following table first.
If the unit does not work, even after the appropriate remedial action has been taken, please
contact your dealer.
CAUTION
When You Think There Is a Malfunction
If a problem occurs, for instance when the receiver or PND does not respond to any button 
presses, or the display does not work correctly, press the [Reset] button using a paper clip or 
similar item.
Pressing the [Reset] button will delete all the entries from memory. The settings will return to 
those made at the factory prior to shipment.
Phenomenon
Possible cause
Action
The screen is dark for a brief 
period when the power is turned 
on at low temperatures.
This is a characteristic of LCDs.
This is not a malfunction. Wait for 
a brief period.
The display is distorted for a brief 
period after the power is turned 
on.
This is a characteristic of LCD 
backlighting.
This is not a malfunction. The 
display will stabilize after a brief 
period.
No sound comes out.
Volume is poorly adjusted or 
MUTE is functioning.
Turn the VOL rotary knob to 
adjust the volume, or release 
MUTE.
The music is muted when the 
PND is attached to the main unit 
and when:
● the voice guidance is ON.
● talking in the hands-free 
mode
*
This is not a malfunction. The 
music can be heard again when 
the voice guidance finishes or the 
hands-free mode is turned off. 
Sound comes out of only one side 
(left or right, front or back).
A speaker wire is disconnected.
Check the connections of the 
speaker wires.
Volume is poorly adjusted.
Check the balance and fader 
adjustments.
Sound quality does not change 
even after making adjustments.
The adjusted audio quality is not 
included in the radio broadcast or 
disc.
Check by changing the radio 
station or disc.
A CD/DVD will not go into the 
deck.
Power is not turned on.
Turn the vehicle ignition switch to 
[ACC] or [ON].
A disc is already inserted and you 
are trying to insert a second disc.
Eject the previously inserted CD/
DVD and insert the preferred CD/
DVD.
[Reset] button