Crane Merchandising Systems Oven Accessories Deli Shop Benutzerhandbuch
Deli Shop Model 436 Setup Guide
4360001
23
ADJUSTING THE PRODUCT DIVIDERS
Add or remove product dividers to accomodate various size
products. Each tray segment can be left alone or divided into
as many as 6 compartments, allowing the machine to vend up to
12 products per level.
products. Each tray segment can be left alone or divided into
as many as 6 compartments, allowing the machine to vend up to
12 products per level.
Proceed as follows:
1. Remove tray segment:
a. Align the carousel as shown.
b. Pull down on the spring clip to release the pin.
c. Pull the tray segment directly out from the center.
b. Pull down on the spring clip to release the pin.
c. Pull the tray segment directly out from the center.
2. Adjust tray divider:
a. Loosen all the retainer screws.
b. Remove all of the metal retainers.
c. Remove the plate holder.
d. Remove, add, or move tray dividers as needed.
e. Reassemble the tray segment in the reverse order of
b. Remove all of the metal retainers.
c. Remove the plate holder.
d. Remove, add, or move tray dividers as needed.
e. Reassemble the tray segment in the reverse order of
disassembly.
PIN
SPRING CLIP
427P0015
RETAINER
PLATE HOLDER
TRAY DIVIDER
SCREW
427P0002