Chicago Electric 47991 Benutzerhandbuch

Page 4

SKU 47991

For technical questions, please call 1-800-444-3353.

21.

Use proper size and type extension

cord. If an extension cord is required,

it must be of the proper size and type

to supply the correct current to the

tool without heating up. Otherwise,

the extension cord could melt and

catch fire, or cause electrical damage

to the tool. This tool requires use of

an extension cord of

0 to 10 amps

capability (up to 50 feet), with wire size

rated at

18 AWG. Longer extension

cords require larger size wire. If you

are using the tool outdoors, use an

extension cord rated for outdoor use

(signified by “WA” on the jacket).

22.

Maintenance. For your safety,

maintenance should be performed

regularly by a qualified technician.

23.

The warnings, cautions, and

instructions discussed in this

instruction manual cannot cover

all possible conditions and

situations that may occur. It must

be understood by the operator that

common sense and caution are

factors which cannot be built into

this product, but must be supplied

by the operator.

UNPACKING

When unpacking, check to make sure

the parts listed on page 6 are included. If

any parts are missing or broken, please call

Harbor Freight Tools at the number on the

cover of this manual as soon as possible.

OPERATION

Refer to FIGURE 1 below.
Warning! Always unplug the unit when

changing bits.

Warning! After drilling or driving screws,

the bit will be extremely hot. Do not

touch it until it has had ample time to

cool down.

1. Insert the

Chuck Key (41) into one of

the holes in the

Chuck (3) and turn it

counterclockwise to open the jaws.

2. Insert the bit and hand tighten it, then

tighten it with the

Chuck Key (41) by

turning it clockwise.

Torque

Switch

Trigger

Power Cord

Side Handle

Chuck

Lock Button

Carbon Brush

(also found on bottom of tool)

Figure 1