Combi BLODGETT BC14GDS Merkblatt

www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401

Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183

SHORT FORM SPECIFICATIONS: Provide Blodgett Combi standard model BC14GDS single or double, combination-oven/steamer. Unit shall have the ability to cook with pressureless
steam, hot air, or combination of steam and hot air. Timer to be 120 minute motor driven. Temperature control to be solid state with rotary knob. Unit shall include two speed fan, steam
on demand and Vario Steam® feature. The interior of the unit(s) shall have the capability of being hosed down for cleaning. Unit shall have a rapid cool down mode. Unit shall be open
vented for waste-air quenching. Customer shall provide a separate 200 psi maximum steam generator for each section. Steam generator shall be separate from the cooking compartment.
Provide start-up inspection service by a factory authorized service agent.

GAS SUPPLY (per section):

3/4" NPT
Inlet Pressure:
Natural

7.0" W.C. static to unit

Propane

14.0" W.C. static to unit

Maximum Input:
Hot Air

65,000 BTU/hr

WATER SUPPLY (per section):

40(min)-50(max) PSI

122°F (50°C) avg. drain temperature

2" drain connection

3/4" hose cold  water

STEAM SOURCE (per section):

Steam supply line

3/4” NPT

Steam must be clean, dry and potable. A particle screen and bucket trap
may be needed and are recommended. 60 lbs per hour is the maximum
usage per oven. Steam supply pressure should not exceed 40 to 50 psi. The
flow pressure is 1-1/2 to 3-1/2 psi and is set at the steam pressure regulator
supplied inside the oven.

Approx. Weight:
Single section

650 lbs. (295 kg)

Double section

1300 lbs. (590 kg)

Stand w/guides

141 lbs. (64 kg)

Crate sizes (per section):
53" H x 45" W x 42" D (1346.2 x 1143 x 1066.8mm)

Printed in U.S.A.

NOTE: FOR COMMERCIAL USE ONLY

P/N R10161 Rev C (9/05)

34-5/8" D x 40-1/8" (879.4 x 1019mm)

33" (838mm) per section

Additional Height:
4" adjustable legs

4-7/8" - 6" (123.8-152.4mm)

6" adjustable legs

6-7/8" - 8" (174.6-203.2mm)

6" adjustable seismic legs

6-5/8" - 8" (168.3-203.2mm)

25" adjustable legs

25-1/4" - 26-3/8" (641.4-670mm)

Low profile caster

4" (101.6mm)

Stand w/rack supports

22-1/2" - 23-5/8" (571.5-600.1mm)

Stand w/rack supports on casters 22-5/8" (574.7mm)

Right Side

1" (26mm)

Rear

6" (152.4mm)

Left Side (with casters)

6" (152.4mm)

Left Side (without casters)

12" (304.9mm)

Uncrated

36-1/4" (921mm)

Crated

42" (1066.8mm)

POWER SUPPLY (per section):

Standard

120VAC 15 amp Nema 5-15 receptacle

Option

208/240VAC 15 amp Nema 6-15 receptacle

Export

Export voltages available on request