Alfa AWAP08O-11gHP Benutzerhandbuch

 

7

If the RJ-45 cable’s length is not long enough to connect to your network 

device for indoor parts installation, you can extend the cable length.   

However, make sure the maximum length of the RJ-45 cable is shorter than 

100M (about 109 yards) for normal operation under IEEE 802.3 standards. 

When you plug the regular RJ-45 cable into the PoE device, you should use 

the regular RJ-45 cable to plug into the “DATA IN” of “Power Over Ethernet 

Kit” to connect to hub/switch or use the crosslink RJ-45 cable (Not included 

in the Packing List) to connect with user’s PC. 

The waterproof RJ-45 cable must be connected to the “P+DATA OUT” port. 

We recommend you refer to the following illustration as a guideline for 

hardware installation.