Allmand Marine Lighting 8330 Benutzerhandbuch
15
SPECIFICATIONS
ELECTRICAL
Hard wired electrical circuits
Easily serviceable componentized ballast
assemblies.
Ground rod.
Hour meter.
Voltmeter (optional)
External 120V and 240V outlets (optional).
Easily serviceable componentized ballast
assemblies.
Ground rod.
Hour meter.
Voltmeter (optional)
External 120V and 240V outlets (optional).
FLOOD LIGHT ASSEMBLY
Four or six 1000 watt lamp fixtures sealed for
all weather use. Lamps can be either the SHO
1000 fixture, 1250 watt fixture or PowerLite
fixture.
all weather use. Lamps can be either the SHO
1000 fixture, 1250 watt fixture or PowerLite
fixture.
SHO 1000 FIXTURE - BT-37 lamp, Metal
Halide, Laboratory rated life is 10,000 hours.
Halide, Laboratory rated life is 10,000 hours.
Lumen rating: 110,000
Warm-up time: 2-4 minutes
Restart time: 10-15 minutes
Warm-up time: 2-4 minutes
Restart time: 10-15 minutes
POWERLITE FIXTURE = BT=56 1000 watt
Multi-Vapor lamp, Metal Halide, Laboratory
rated life is 12,000 hours.
Multi-Vapor lamp, Metal Halide, Laboratory
rated life is 12,000 hours.
Lumen rating: 110,000
Warm-up time: 2-4 minutes
Restart time: 10-15 minutes
Warm-up time: 2-4 minutes
Restart time: 10-15 minutes
POWERLITE FIXTURE - E-25 1000 watt
High Pressure Sodium lamp (often referred to
as H.P.S), Laboratory rated life is 24,000
hours.
High Pressure Sodium lamp (often referred to
as H.P.S), Laboratory rated life is 24,000
hours.
Lumen rating: 140,000
Warm-up time: 4-6 minutes
Restart time: 1 minute
Warm-up time: 4-6 minutes
Restart time: 1 minute
NOTE: A trailer equipped with Metal Halide
lights and a trailer equipped with High Pres-
sure Sodium lights use different ballasts and
starters. Therefore, it is not advisable to
interchange bulb types.
lights and a trailer equipped with High Pres-
sure Sodium lights use different ballasts and
starters. Therefore, it is not advisable to
interchange bulb types.
MAST
TRAILER
The complete generator is housed in a
lockable enclosure with the frame fabricated
from heavy gauge steel mounted on a two-
wheel, leaf spring axle.
The design enables the trailer to contain the
outriggers in a simple compact position.
lockable enclosure with the frame fabricated
from heavy gauge steel mounted on a two-
wheel, leaf spring axle.
The design enables the trailer to contain the
outriggers in a simple compact position.
When the mast is in the operating position it
is located in the middle of a four point
outrigger system for optimum balance and
stability. This system was engineered to
allow the light plant to remain operational in
sustained winds of 65 MPH with the mast
extended to full height and the outriggers in
position.
The design includes an adjustable-height re-
versible hitch, which includes a 2” ball and
pintle hook hitch.
is located in the middle of a four point
outrigger system for optimum balance and
stability. This system was engineered to
allow the light plant to remain operational in
sustained winds of 65 MPH with the mast
extended to full height and the outriggers in
position.
The design includes an adjustable-height re-
versible hitch, which includes a 2” ball and
pintle hook hitch.
STABILIZERS
Four (4) point outrigger design. with tower
center mounted between two (2) retractable
side outriggers, tongue and rear jack.
center mounted between two (2) retractable
side outriggers, tongue and rear jack.
Three-section steel tube mast, which
extends to 30 feet. The mast is extended
with either two manual winches or one
Dutton-Lainson electric winch. The as-
sembly includes self-lubricating nylon
guide rollers and 360° rotating light bar.
extends to 30 feet. The mast is extended
with either two manual winches or one
Dutton-Lainson electric winch. The as-
sembly includes self-lubricating nylon
guide rollers and 360° rotating light bar.