Directed Electronics Automobile Parts RSIII Benutzerhandbuch
©
2003
Directed Electronics, Inc.
31
2.
K
Keeyy.. Turn the ignition ON. (The heavy-gauge PINK wire of the relay
satellite must be connected.)
satellite must be connected.)
3.
SSeelleecctt tthhee rreecceeiivveerr C
Chhaannnneell.. Press and release the Valet/program switch
the number of times necessary to access the desired channel. Once you
have selected a channel, press and HOLD the Valet/program switch once
more. The siren will chirp and the LED will blink the number of times
corresponding to the channel that has been accessed.
have selected a channel, press and HOLD the Valet/program switch once
more. The siren will chirp and the LED will blink the number of times
corresponding to the channel that has been accessed.
NOTE: If adding a transmitter/receiver, a button must be taught to the unit in the Channel One
or Channel Five position prior to programming other channels.
or Channel Five position prior to programming other channels.
4.
PPrreessss tthhee ttrraannssm
miitttteerr bbuuttttoonn.. While holding the Valet®/Program switch,
press the button from the transmitter that you wish to assign to that
channel. The unit will chirp indicating successful programming. It is not
possible to teach a transmitter button to the system more than once.
channel. The unit will chirp indicating successful programming. It is not
possible to teach a transmitter button to the system more than once.
5.
R
Reelleeaassee.. Once the code is learned, the Valet®/Program button can be
released
released
C
Chhaannnneellss ##11,, 55,, 66,, 77:: Channels 1, 5, 6, and 7 are used to assign the arm, disarm and panic functions
to specific buttons on the transmitter/receiver. Teaching a button to Channel 1 or 5 erases some
information about that transmitter/receiver from memory. Any auxiliary functions that are desired
may have to be reprogrammed.
to specific buttons on the transmitter/receiver. Teaching a button to Channel 1 or 5 erases some
information about that transmitter/receiver from memory. Any auxiliary functions that are desired
may have to be reprogrammed.
NOTE: To avoid confusion, delete all transmitters before changing button configurations.
Channel Number
Function
Wire Color
1
Arm/Disarm/Panic
2
Silent Mode/Remote Valet/Trunk Release
RED/WHITE
3
Remote Start
4
Second unlock or other accessories
VIOLET/BLACK
5
Arm only
6
Disarm only
7
Panic only
8
Auto-learn Standard Configuration*
9
Auto-learn Single Button Arm/Disarm Configuration*
10
Delete all transmitters
*
*NOTE: For Auto Learn Configurations, see Transmitter Configurations section of this guide.