Dimplex R10/73 - 10kW Benutzerhandbuch

The installation may be fitted with several additional environmental

controls.

A room thermostat may be fitted in the room.  This thermostat controls

the operation of the heater fan.  Adjust the setting until a comfortable

environment is achieved.

Note however the higher the thermostat setting the higher the

running costs.

Where duct work is installed individual rooms will be fitted with

supply air registers.  If a room is not in use the supply registers can

be closed.

A washable filter is fitted to ensure the warm air distributed is clean

and free from dust.  The filter is located in the detachable lower

panel and should be washed in warm soapy water at least twice a

year (see Fig. B).  The filter panel can be removed by pulling the top

end away from the heater and lifting out the location hooks.

To maintain the appearance of the heater, wipe occasionally with

a dry cloth when the heater is cool.  Do not use abrasive powders

or furniture polish.

IMPORTANT - Do not remove any panel before isolating the heating

unit from all electrical supplies.  Additional maintenance should

only be carried out by a trained engineer or electrician.  When

required contact your local electricity board or the installer.  Regular

inspection should take place, at least every two years.