BMW 2012 740i Sedan Benutzeranleitung
1.
Snap out the grill at the recess, arrow.
2.
Remove the screw using a screw driver.
3.
Pull the lamp out toward the front.
4.
Remove the bulb and replace it.
5.
Insert the new bulb and attach the cover in
the reverse order.
the reverse order.
Tail lamps, bulb replacement
At a glance
1 Turn signal
2 Backup lamp
3 Inside brake lamp*
4 Tail lamp
5 Outside brake lamp
6 Rear reflector*
2 Backup lamp
3 Inside brake lamp*
4 Tail lamp
5 Outside brake lamp
6 Rear reflector*
Turn signal, brake, tail, and license
plate lamps
Follow the general instructions on lamps and
bulbs., refer to page
bulbs., refer to page
These lights are made using LED technology.
Contact your service center in the event of a
malfunction.
Contact your service center in the event of a
malfunction.
Lamps in the trunk lid
Follow the general instructions on lamps and
bulbs., refer to page
bulbs., refer to page
Access to the lamps
1.
Remove the three screws using the screw
driver from the tool kit.
driver from the tool kit.
2.
Fold away the cover.
3.
Replace the defective bulb.
Seite 263
263
Online Edition for Part no. 01 40 2 606 497 - 03 11 490