Maestro Guitars Film Camera P0834568 Benutzerhandbuch
12
Maestro User Guide
Answering your questions
Display is in the wrong language.
You can change the language by pressing the OPTIONS key and pressing
1
twice.
Callers are not identified on the display.
Until you subscribe to Caller ID or Call Waiting ID from your telephone company, your
telephone will not receive the name/number of a caller.
telephone will not receive the name/number of a caller.
Persistent clicking or tones interrupt calls.
Turn off Option 9 using the OPTIONS key. When this option is turned OFF, your Mæstro
will act as a Caller ID telephone only.
You hear the Call Waiting ID tone but no caller information is on the display.
You need to subscribe to Call Waiting ID and/or confirm that the Call Wait ID option is
ON (see Option 9).
ON (see Option 9).
While pressing
,,,,
Review
oooo
, the display shows
List is empty
.
You must subscribe to Caller ID or Call Waiting ID, for the telephone to record incoming
calls.
calls.
No dial tone.
Check phone cord
may appear on the display.
Read the display. If the line cord is not attached properly the display will prompt you.
Also, make sure the receiver cord is attached securely.
Also, make sure the receiver cord is attached securely.
Telephone doesn’t ring.
Ringer is OFF
may appear on the display.
The ringer may be turned OFF. Without lifting the receiver, press the right side of the
volume bar — to turn the ringer ON. You can adjust ringer volume and tone in the
OPTIONS list.
volume bar — to turn the ringer ON. You can adjust ringer volume and tone in the
OPTIONS list.
No information on the display and ringer volume is low.
Make sure the power adaptor is plugged into a working electrical outlet.
Cannot hear a caller or be heard.
Make sure the receiver cord is inserted securely into the jack. If you are using Speaker/
Mute ensure that the Mute feature is not active. The red light beside the Speaker/Mute key
will flash if mute is in use.
Mute ensure that the Mute feature is not active. The red light beside the Speaker/Mute key
will flash if mute is in use.
Light stays ON and display shows
F
F
F
Fe
e
e
ea
a
a
at
t
t
tu
u
u
ur
r
r
re
e
e
e O
O
O
ON
N
N
N
even when call forwarding
is not in use.
You must program a call forwarding OFF key “To save a Call Forwarding OFF key:” on
page 11.
page 11.
When you have a power failure.
Mæstro will still operate as a regular telephone during a power failure, but the display, the
advanced features, and shifted memory keys will not operate until the power is restored.
advanced features, and shifted memory keys will not operate until the power is restored.
Cannot switch to an incoming Call Waiting ID caller.
Make sure that all off-hook extensions are SuperFlash capable. Also, a pause of 3 seconds
is required before pressing
is required before pressing
F
LASH
again.
For customer service and technical assistance please call 1-800-574-1611.
P0834568 01 E UG 3500 US Page 12 Tuesday, April 25, 2000 3:48 PM