LogTag Recorders LogTag Analyzer Temperature Recorder Benutzerhandbuch

Seite von 140
48 
LogTag Analyzer  
 
Getting results from 
LogTag 
You can retrieve the recordings from LogTag(s) as many times as you require. The 
process of retrieving data stored within a LogTag does not erase it from the LogTag's 
memory. If the LogTag is currently recording while you retrieve the information, it will 
continue to record without interruption. 
There are three ways to retrieve the recorded results from a LogTag.  
1  While the LogTag Analyzer software is open (does not need to be the currently active 
software), simply slot the LogTag into the Interface Cradle. If the automatic download 
feature is enabled, the software will automatically retrieve the recorded readings, save 
the information to your disk drive and display the information to you. While the 
software is automatically retrieving the readings you will see an animated picture 
appear, similar to the following picture. 
 
2  Click the "Download..." menu item located in the LogTag menu. 
 
 
This is the second quickest option, as it does not include the steps involved in 
preparing the LogTag(s) for their next use. 
3  Click the LogTag icon ( ) or the "Wizard..." menu item located in the LogTag menu. 
This option will allow you to prepare the LogTag for its next use after retrieving the 
readings stored within the LogTag. If you do not need to configure the LogTag for its 
next use now, the previous option described may be preferred as it will not involve the 
configuration steps and therefore be a quicker and simpler method.