LevelOne FBR-1100TX Benutzerhandbuch
![LevelOne](https://files.manualsbrain.com/attachments/27321eb1c09195d2df7b5aaacecc433a76036208/common/fit/150/50/dab1899b0abf7f31bb54c10c5d1ba593edc572333e44d8f7c8afed29b166/brand_logo.jpeg)
LevelOne Broadband Router User Guide
70
Remote Management
This feature allows you to manage the LevelOne Broadband Router via the Internet.
Figure 40: Remote Management Screen
Data - Remote Management Screen
Remote Management
Enable Remote
Management
Management
Enable to allow management via the Internet. If Disabled, this device
will ignore management connection attempts from the Internet.
will ignore management connection attempts from the Internet.
Port Number
Enter a port number between 1024 and 65535 (8080 is recommended).
This port number must be specified when you connect (see below).
This port number must be specified when you connect (see below).
Note: The default port number for HTTP (Web) connections is port
80, but using port 80 here will prevent the use of a Web "Virtual
Server" on your LAN. (See Advanced Internet - Virtual Servers)
80, but using port 80 here will prevent the use of a Web "Virtual
Server" on your LAN. (See Advanced Internet - Virtual Servers)
Current IP Address
You must use this IP Address to connect (see below).
This IP Address is allocated by your ISP. But if using a Dynamic IP
Address, this value can change each time you connect to your ISP.
So it is better if your ISP allocates you a Fixed IP Address.
Address, this value can change each time you connect to your ISP.
So it is better if your ISP allocates you a Fixed IP Address.
To connect from a remote PC via the Internet
1.
Ensure your Internet connection is established, and start your Web Browser.
2.
In the "Address" bar, enter "HTTP://" followed by the Internet IP Address of the LevelOne
Broadband Router. If the port number is not 80, the port number is also required. (After the
IP Address, enter ":" followed by the port number.)
e.g.
Broadband Router. If the port number is not 80, the port number is also required. (After the
IP Address, enter ":" followed by the port number.)
e.g.
HTTP://123.123.123.123:8080
This example assumes the WAN IP Address is 123.123.123.123, and the port number is 8080.