BMW 2007 M5 Sedan Benutzeranleitung

Select "MDrive" and press the controller.

The functions contained in MDrive are dis-
played:

"SMG Drivelogic"
Sequential Manual Transmission with
Drivelogic: Shifting modes and Drive-
logic driving programs, refer to page

"EDC"
Programs of the Electronic Damping
Control, refer to page

"DSC"
Dynamic Stability Control and
M Dynamic Mode, refer to page

"POWER"
Programs of the M Engine Dynamic
Control, refer to page

"Backrest:"

Programs of the active backrest width
adjustment, refer to page

"Head-Up Display"

Views of the Head-Up Display, refer to
page

You can reset all settings for MDrive to the
default values:

"Reset to default"

Select the desired function.

Press the controller.

Turn the controller to select the desired set-
ting.

"Unchanged" retains the current setting
made outside of MDrive.

Press the controller.

The setting is stored for the remote control cur-
rently in use.

Activating settings

Press the button on the steering wheel.

The indicator lamp in the instrument
cluster lights up. The settings made on
the Control Display for the functions

contained in MDrive are active.
Pressing the button again deactivates MDrive.

If the indicator lamp flashes after pressing
the button, MDrive was unable to react, as

the ABS Antilock Brake System or DSC
Dynamic Stability Control is currently control-
ling the vehicle stability. Press the

button

again when the indicator lamp no longer
flashes.

Even with MDrive activated, you can change
individual settings outside MDrive, e.g. with the
buttons in the center console. To reactivate all
settings made for MDrive on the Control Dis-
play: press the button twice.

ba8_m5us.book Seite 51 Montag, 5. Februar 2007 12:03 12