Maytag MGDP475EW Benutzeranleitung

Along with heat, dryers require good air flow to efficiently 

dry laundry. Proper venting will reduce your drying times and 

improve your energy savings. See Installation Instructions.
The venting system attached to the dryer plays a big role in 

good air flow.
Service calls caused by improper venting are not covered by 

the warranty and will be paid by the customer, regardless of 

who installed the dryer.

Use the Sensor Cycles to provide the most energy savings and enhanced fabric care from the dryer. During Sensor Cycles, drying 

air temperature and moisture level are sensed in the load. This sensing occurs throughout the drying cycle and the dryer shuts 

off when the load reaches the selected dryness. With Timed Dry, the dryer runs the amount of time set and sometimes results in 

shrinkage, wrinkling, and static due to over-drying. Use Timed Dry for the occasional damp load that needs a little more drying time 

or when using the drying rack.

 

■

Cleaning your lint screen before each load.

 

■

Replace plastic or foil vent material with 4" (102 mm)  

diameter heavy, rigid vent material. 

■

Use the shortest length of vent possible. 

 

■

Use no more than four 90° elbows in a vent system;  

each bend and curve reduces air flow.

 

■

Remove lint and debris from the exhaust hood.

 

■

Remove lint from the entire length of the vent system at 

least every 2 years. When cleaning is complete, be sure 

to follow the Installation Instructions supplied with your 

dryer for final product check.

 

■

Clear away items from the front the dryer.