Perlick HP24TS31R2A Installationsanweisungen

5

perlick.com

PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT

2.  Remove air “T” from end of air tube by loosening fastener holding the two halves together. Remove the air tube 

from the tower being careful not to damage the product tube. 

3.  Cut air tube at mark made in step 1. Re-install air tube into tower and re-install “T” on the end of the air tube so “T” 

faces the rear of the tower. 

4.  Cut product tube 3 inches below the “T” and install included barbed union into product tube and clamp using 

worm drive clamp.