Monogram ZVC30LSS Installationsanweisungen
9
Design Information
PRODUCT DIMENSIONS
4
″
52-1/2
″
21-1/4
″
1/2
″
6-7/8
″
7-1/2
″
A 1/2
″ wide flange surrounds the outside edge of
the insert sleeve.
Remote Location for the Control
The control may be removed from the hood
and installed into a wall or countertop. A 30-ft.
length of wire is supplied to accommodate most
installations. A blanking plate covers the opening
when the controls are removed.
The control may be removed from the hood
and installed into a wall or countertop. A 30-ft.
length of wire is supplied to accommodate most
installations. A blanking plate covers the opening
when the controls are removed.
The overall size of the control is 4-1/4
″ wide and
2-1/4
″ deep.
We recommend that the cutout in granite or other
hard surfaces be made before the countertop is
installed.
hard surfaces be made before the countertop is
installed.
The stainless steel liner is shipped with each hood
insert. This non-combustible liner protects the
underside of the canopy.
insert. This non-combustible liner protects the
underside of the canopy.
Custom Liner
If you are not using the supplied liner, you may
construct a custom non-combustible liner. Use the
supplied liner as a template. The opening must be
38-3/4
If you are not using the supplied liner, you may
construct a custom non-combustible liner. Use the
supplied liner as a template. The opening must be
38-3/4
″W x 13-3/16″D. 3/4″ thick material must
surround the opening to allow the sleeve locking
clips to engage. The insert sleeve inside the cabinet
should be positioned 1/2
clips to engage. The insert sleeve inside the cabinet
should be positioned 1/2
″ from the rear wall so
that the center of the 8
″ duct is 5-1/2″ from the
rear wall.
*Opening
ZVC54
The custom canopy must be sized to fit the insert
sleeve. Construct the canopy with an opening
that is:
38-3/4
″W x 13-3/16″D
The opening must be constructed of 3/4
″ thick
material to allow the sleeve locking clips to
engage.
engage.
The Supplied Liner
Dimensions and Specifications (in inches)
Outside Dimensions
The Insert Sleeve
38-1/2
″
13
″
14
″
29-1/2
″
1/2
″
1/2
″
1/2
″
13
″
1-11/16
″
3-11/16
″
Control cutout
14
″
39-1/2
″