Dacor DCT365BLPH Benutzeranleitung

9

Care and Cleaning

Inner burner cap

Outer burner cap

Igniter on 

burner base

Top of burner 

base

Burner ring 

slots

Cleaning the Burners and Igniters

Use care while cleaning the igniters. The porcelain is 

fragile and can crack or break.

IMPORTANT: Dirty or wet igniters may not work 

properly or may not spark at all. Also the ignit-

ers may not work if any other burner parts are not 

clean. 
Check for any dirt or grime deposited on the indi-

vidual burner parts, or the igniters.
1.  Clean completely around the igniter, including 

over and under the edge of the metal top and 

porcelain base. A firm toothbrush is also ideal for 

this task. Use care while cleaning because the 

porcelain is fragile and can crack or break. Do 

not use water to clean the igniters. If necessary, 

use a small amount of rubbing alcohol to help 

dissolve grime.

Burner cap

Igniter on 

burner base

Burner ring 

slots

CAUtION: Top of 

igniter is sharp

2.  Examine the burner rings and the top of the 

SimmerSear burner base. Remove anything 

stuck in the slots with a straightened paper clip, 

wire or needle. Be careful not to scratch, deform 

or damage the ring and base. Do not distort the 

shape of the slots. Since the SimmerSear burner 

base is not removable, it must be cleaned in 

place.

3.  Clean all the burner parts, including the Sim-

merSear burner base, with window cleaner 

or rubbing alcohol. Use a cleaning brush with 

plastic bristles or a firm tooth brush. When done, 

rinse the parts well with clean water. Dry all the 

parts thoroughly before re-assembling them.

4.  Reassemble the cooktop according to the burner 

and grate assembly instructions on page 5. 

Test the burners after reassembling them. If 

the flame is uneven, be sure that all the burner 

parts are properly positioned, then check for any 

remaining dirt or grime on the burner parts or 

igniter. If erratic clicking is still present, make 

sure the igniter is completely dry. If the unit still 

exhibits problems after drying, call your local 

Dacor Authorized Service Agent.

Stainless Steel Surfaces Including Spill Tray

•  Always wipe stainless steel (silver colored) surfaces 

with the grain. To prevent scratching, do not use 

abrasive cleaners or scrubbers on stainless steel 

surfaces.

•  Use stainless steel cleaner only on stainless steel 

surfaces.

•  The spill tray and the panels surrounding it 

are made of high quality stainless steel. Clean 

stainless steel surfaces with the Dacor Stainless 

Steel Cleaner included with your cooktop. Use it 

according to the directions on the package. You 

may order additional stainless steel cleaner at 

www.everythingdacor.com. Order part# A302.

•  You may also clean the stainless steel surfaces 

with a mild solution of detergent and warm 

water. Rinse and dry with a soft, lint-free cloth.