Maytag MEDP475EW Benutzeranleitung

Cycle time too short

Sensor Cycle ending early.

The load may not be contacting the sensor strips. Level the dryer.
Use Timed Dry for very small loads. Change the dryness level setting 

on Sensor Cycles. Increasing or decreasing the dryness level will 

change the amount of drying time in a cycle. 

Lint on load

Lint screen clogged.

Lint screen should be cleaned before each load.

Stains on load or drum

Dryer fabric softener not properly used. Add dryer fabric softener sheets at the beginning of the cycle. 

Fabric softener sheets added to a partially dried load can stain your 

garments. Drum stains are caused by dyes in clothing (usually blue 

jeans). These will not transfer to other clothing.

Loads are wrinkled

Load not removed from dryer at the  

end of the cycle.

Select Wrinkle Prevent cycle to tumble the load without heat to 

avoid wrinkling.

Dryer tightly packed.

Dry smaller loads that can tumble freely reduce wrinkles from 

forming.

Odors

You have recently been painting, 

staining, or varnishing in the area  

where your dryer is located.

If so, ventilate the area. When the odors or fumes are gone from the 

area, rewash and dry the clothing.

The electric dryer is being used for  

the first time.

The new electric heating element may have an odor. The odor will be 

gone after the first cycle.

Load is too hot

Laundry items removed from the dryer 

before the end of the cycle.

Allow the dryer to finish the cool down cycle before removing 

laundry from dryer. All cycles are cooled slowly to reduced wrinkling 

and make it easier to handle. Items removed before cool down may 

feel very warm.

A high temperature cycle was used  

or the Temp was set on high.

Select a lower temperature, and use an sensor drying cycle. These 

cycles sense the temperature or the moisture level in the load and 

shut off when the load reaches the selected dryness. This reduces 

overdrying.

First try the solutions suggested here or visit our website at www.maytag.com/product_help - 

In Canada www.maytag.ca for assistance and to possibly avoid a service call.