Maytag MEDP475EW Benutzeranleitung

Press the START/PAUSE button to begin the cycle.
Promptly remove garments after cycle has completed to  

reduce wrinkling.

Setting dryer temperature:

 

■

A High heat setting may be used for drying heavyweight items 

such as towels and work clothes.

 

■

A Low to Medium heat setting may be used for drying  

medium-weight items such as sheets, blouses, dresses,  

underwear, permanent press fabrics, and some knits.

 

■

Use an no heat (air dry) setting for foam, rubber, plastic, or  

heat-sensitive fabrics. Line dry bonded or laminated fabrics.

NOTE: If you have questions about drying temperatures for  

various loads, refer to the care label directions.
Wrinkle Prevent feature

■

Get up to 90 minutes of heat-free, periodic tumbling at the  

end of a cycle. 

Keep dryer area clear and free from items that would  

block the air flow for proper dryer operation. This includes 

clearing piles of laundry in front of the dryer.

To clean dryer drum
1.  Apply a liquid, nonflammable household cleaner to the 

stained area of the drum and rub with a soft cloth until  

stain is removed.

2.  Wipe drum thoroughly with a damp cloth.
3.  Tumble a load of clean cloths or towels to dry the drum.

NOTE: Garments that contain loose dyes, such as denim blue 

jeans or brightly colored cotton items, may discolor the dryer 

interior. These stains are not harmful to your dryer and will 

not stain future loads of clothes. Dry these items inside out to 

avoid drum staining.

From Inside the Dryer Cabinet
Lint should be removed every 2 years, or more often,  

depending on dryer usage. Cleaning should be done  

by a qualified servicer.
From the Exhaust Vent
Lint should be removed every 2 years, or more often,  

depending on dryer usage.

Every load cleaning
The lint screen is located in the door opening of the dryer. A 

screen blocked by lint can increase drying time.
To clean:

1.  Pull the lint screen straight up. Roll lint off the screen with 

your fingers. Do not rinse or wash screen to remove lint. 

Wet lint is hard to remove.