Maytag MEDB755DW Installationsanweisungen

Using a 4" (102 mm) clamp, connect vent to exhaust outlet 

in dryer. If connecting to existing vent, make sure vent is 

clean. Dryer vent must fit over dryer exhaust outlet and inside 

exhaust hood. Check that vent is secured to exhaust hood 

with a 4" (102 mm) clamp.

Move dryer to final location. Avoid crushing or kinking vent. 

Check for leaks around “Y” connector, faucet, and hoses.

       Not Level 

            

LEVEL                    Not Level

Check levelness of dryer from side to side. Repeat from  

front to back. 
NOTE: The dryer must be level for the moisture sensing system 

to operate correctly.

If dryer is not level or the same height as the washer, prop up 

using a wood block. Use wrench to adjust legs up or down, 

and check again for levelness. Once legs are level, make sure 

all four legs are snug against the floor before tightening them.