TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P Benutzerhandbuch

The TCP/IP options allow you to modify the print server’s TCP/IP settings. Each option is 
detailed as follows. 

 

 

This option enables or disables the DHCP feature of the print server. When this option is 
enabled, the print server will obtain an IP address automatically from the DHCP server on 
your LAN.  The default value is “Disable”. 
 

Note: 1.Once this option is enabled, the following IP address, Subnet Mask, Gateway will be 

grayed out and are not available for editing. 

 
          2.While the print server supports DHCP, we strongly recommend you manually specify 

a fixed IP address to the print server. 

Specify an IP address: 

IP Address:  This option shows the print server’s current IP address maybe obtained from 

your DHCP server or manually specified. This option also allows you to 
manually specify an IP address to the print server, if DHCP option is disabled. 

 
Subnet Mask: This option shows the print server’s current subnet mask maybe obtained 

from the DHCP server or manually specified. This option also lets you 
manually specify a subnet mask to the print server, if DHCP option is 
disabled. This value is optional. 

 
Gateway: This option shows the print server’s current gateway address maybe obtained 

from the DHCP server or manually specified. The option also allows you to 
manually specify the IP address of the gateway to the print server, if DHCP option 
is disabled. This value is optional 

 

22