TP-LINK Single Parallel Port Fast Ethernet Print Server TL-PS110P Benutzerhandbuch

 

9. Troubleshooting 

The most common problems, which cause the print server to perform improperly, are 
covered in this chapter.  If a problem still exists after reading this chapter, please contact your 
dealer for technical support.  
 
 
LED Light Indicators 
 
The print server is equipped with LED lights to assist in diagnosing problems that are the 
result of the network and/or the print server hardware itself. 
 
 
Status (Yellow) 

When the print server unit is powered on, the Status LED will flash five times as part of the 
unit’s Power On Self Test (POST).  This indicates that the print server hardware is properly 
configured. 
 

Note: Make sure that the LED flashes five times (POST) upon connecting the power. If the 

unit does not flash five times, contact your dealer for a replacement or repair. 

 
LAN (Green: 100Mbps; Yellow: 10Mbps) 

 
 

The print server requires an external AC power adapter in order for it to function. If you have 
a power problem, check to see whether the power cord or its connectors are damaged. More 
importantly, check to see that the AC power adapter included with the print server matches 
the AC voltage in your country or area. Using an incorrect AC adapter will damage your print 
server. 

 
 
Print Port Related Problems

Printing data failure may be caused by a loose connection of the print server to the parallel 
port of the printer. Check to see if any of the pins on the parallel port connector are damaged. 
In addition, check the cable connection. If the pins are damaged, contact your dealer for a 
replacement connector. 
 

 

66