Dacor DR30GFSLP Installationsanweisungen

Side Panel Removal

(Model DR30GIS/DR30GIFS only)
If the range will be installed with the partial side panels 

removed:
1.  Remove the three screws just below the oven opening 

that hold the kick panel in place.

2.  Pull the kick panel straight out to snap it off of the 

range.

3.  Remove the three screws that hold the side panel in 

place as shown.

4.  Push the side panel toward the back of the range to 

snap it out of the control panel and remove it.

Installation Instructions

Door Removal

Remove the door to make the range easier to move during 

the installation process.

•  Do not attempt to disengage the hinge catches with 

the door removed from the oven. The hinge springs 

could release causing personal injury.

•  Do not lift or carry the oven door by the door handle.

1.  Open the door to its fully opened position. 
2.  Use a flat blade screwdriver to rotate the catch over the 

retaining arm on both hinges.

3.  Lift the oven door to about a 15° angle from the vertical 

position.

4.  Hold the door with both hands just below the handle. 

Pull the door up and away from the oven. 

Retaining arm

Catch

NOTE: Handle 

style varies