Maytag MED8000A Datenbogen

Seite von 4
Inlet Hose Connection Instructions for Steam Dryers
Instrucciones para la conexión de la manguera de entrada  
para secadoras con vapor
Instructions de raccordement du tuyau d’arrivée d’eau pour  
les sécheuses avec vapeur
TOOLS AND PARTS
Gather the required tools and parts before starting installation. 
The dryer must be connected to the cold water faucet using the 
new inlet hoses. Do not use old hoses.
Tools needed:
INSTALLATION REQUIREMENTS
2' (0.6 m) Inlet hose
5' (1.5 m) Inlet Hose
Rubber washer
Parts needed: 
(Not supplied with dryer)
Pliers
W10097140B
CONNECT INLET HOSES
1.   Turn cold water faucet off and remove washer inlet hose.
2.   Remove old rubber washer from inlet hose and replace  
with new rubber washer provided. Inspect hoses to be sure 
rubber washers are in place.
3.   Attach short hose to cold water faucet. Screw on coupling  
by hand until it is seated on faucet.
4.   Using pliers, tighten the couplings with an additional  
two-thirds turn.
  
NOTE: Do not overtighten. Damage to the coupling can    
 result.
5.   Attach “Y” connector to the end of small hose. Screw on 
coupling by hand until it is seated on connector.
6.   Attach one of the long hose ends to the “Y” connector. Screw 
on coupling by hand until it is seated on connector.
7.   Attach washer cold inlet hose (A) to other end of “Y” 
connector. Screw on coupling by hand until it is seated  
on connector.
8.   Using pliers, tighten the couplings an additional two-thirds 
turn. 
  
NOTE: Do not overtighten. Damage to the coupling can    
 result.
9.   Attach other end of long hose to fill valve at bottom of dryer 
back panel. Screw on coupling by hand until it is seated  
on fill valve connector.
10.  Using pliers, tighten the couplings an additional two-thirds 
turn. 
  
NOTE: Do not overtighten. Damage to the coupling can  
 result.
11.  Check that the water faucets are on.
12.  Check for leaks around “Y” connector, faucet, and hoses.
“Y” connector
Parts Supplied:
Your installation may require 
additional parts. To order,  
please contact the dealer  
from whom you purchased  
your dryer or an authorized  
service company.