Dacor ER48DSCHNG Designanleitung

All specifications subject to change without notice.

Phone: (800) 793-0093

www.dacor.com

Document # PG05-004

Revised 09/08/14   Page 2/2

ER36D

42” (106.7 cm)* 

36” (91.4 cm)**

36 1/16”  

(91.6 cm)**

33 1/2” 

(84.8 cm)

ER48D

54” (137.2 cm)* 

48” (121.9 cm)**

48 1/16”  

(122.1 cm)**

43 1/2” 

(110.2 cm)

* Recommended 

**Minimum

 

■

For replacement purposes, the location of the existing utilities may 

be utilized provided they do not interfere with the sides or rear of the 

range. Check local building codes for permissible locations.

 

■

An external manual shut-off valve must be installed between the gas 

inlet and the range, for the purpose of turning on or shutting off gas to 

the appliance. 

 

■

Access to the gas shut-off valve when the unit is installed. 

 

■

Access to the remote circuit breaker panel/fuse box, when the range 

is in place.  

 

■

The gas supply piping and shut-off valve, and the electrical junction 

box/receptacle must be located so they do not interfere with the range 

when it is installed.

 

■

The junction box and gas shut off valve must be located so that 

the range can be pulled out for service while the appliance remains 

connected. 

Note 2

F

G

2

 Cabinet/countertop depth is at discretion of customer but 

cabinet face MUST NOT protrude further than rear of front 

panel, see product dimensions.

3

 Vertical distance from range top panel level.

1

 Vertical to combustible surface from range grate level; if 

installing an overhead vent hood, also check the hood 

specifications for minimum required clearances. 

Non-combustible 

surface along 

back wall

recommended

10” (25.4 cm) min.

to combustible side

walls above the range

(both sides)

30” (76.2  cm)

min.

1

36 1/2” 

(92.7 cm)

max.

13” (33.0 cm)

max.

4

18” (45.7 cm)

min.

3, 4

Suggested 

location of 

utilities

 

3

4

 This specification does not apply for cabinets more 

than a horizontal distance of 10” (25.4 cm) from the 

edge of the range.

G

10" (25.4 cm) min.
to combustible side
walls above the range
(both sides)

non-combustible

Minumum  Countertop Height:

30 1/4” (76.8 cm) 

Maximum  Countertop Height:

36 1/2” (92.7 cm)

rear wall recommended

Backsplash

3/8" (1.0 cm)

Min. flat countertop

overhang

H

2 13/16"

(7.1 cm)

Note 2

ERV36-ER

ER36D

ERV48-ER

ER48D

Stiffener

Cabinet face**

Countertop*

* 

IMPORTANT: See “CUTOUT WITH OPTIONAL ERV DOWNDRAFT VENT” 

for countertop cutout dimensions.

*** Includes 3/16” (5 mm) space between downdraft vent and range.

** 

IMPORTANT: Cabinet face must not stick out further than

back of control panel.

Back of

control

panel

ERV36-ER or

ERV48-ER

downdraft vent

ER36D or ER48D Range

3/8” Min. (1.0 cm)

space behind

doendraft vent 

chassis to clear

stiffener

3/8” Min. (1.0 cm)

flat countertop

overhang required

behind cutout

31 1/2” min. (80.0 cm)***

Countertop height:

30 1/4" (76.8 cm) min.

36 1/2” (92.7 cm) max.

Cutout tolerances: +1/16” (+1.6 mm), -0 unless otherwise stated