Dacor ER48DSCHLPH Installationsanweisungen
7
Preparing for Installation
WARNING
•
If the gas or electric service provided does not meet the
product specifications, do not proceed with the installation.
Call the dealer, the gas supplier or a licensed electrician.
•
Before installing the range, you must locate and secure the
anti-tip bracket to the floor.
IMPORTANT: Within the Commonwealth of Massachusetts, this
appliance must be installed by a licensed plumber or gas fitter.
Unpacking the Range
Unpack the parts box and verify that all required components
have been provided. If any item is missing or damaged, please
contact your dealer immediately. Do not install a damaged or
incomplete appliance. The customer must report cosmetic issues
within 30 days of installation.
Installation Instructions
Parts List
•
3 Grates (PN 700037)
1
•
2 Small stack burner caps
2
•
2 Small stack burner rings
2
•
2 Large stack burner caps
3
•
2 Large stack burner rings
3
•
2 Crown burner caps
4
•
2 Crown burner rings
4
•
2 Crown burner heads
4
•
2 GlideRack™ oven racks
(PN 72770)
•
1 Standard size rack
(PN 62783)
•
3 18” Racks
(ER48D only, PN 62782)
•
6 Knobs
5
•
Anti-tip bracket w/screws
•
Meat probe (PN 72723)
•
Griddle (PN 700570)
•
Wok ring (PN AWR4)
•
Stainless steel cleaner
(PN A302)
•
Literature kit
•
Broiler pan/grill
(PN 82107/82106)
See the use and care manual for a list of optional accessories.
1
Center grate on ER36D: PN 700038
2
Small stack burner kit: PN 100699
3
Large stack burner kit: PN 700493
4
Crown burner kit: PN 100703
5
Standard (PN 100127-01), MAX GRIDDLE (PN 100127-02)
Installing an Downdraft Vent (Optional)
Install the downdraft vent before installing the range. See the
installation instructions included with the downdraft vent.
IMPORTANT: The downdraft vent attaches to the narrow back
IMPORTANT: The downdraft vent attaches to the narrow back
portion of the cutout. It is self-supporting in the cutout and does
not actually attach to the range itself.
Installing a Backguard (Optional)
WARNING
Do not operate the range without the island trim or a backguard
installed.
Install the backguard before making the range gas and electrical
connections. Install it according the installation instructions
included with the backguard kit.
Approved backguard kits: AERBxx-D3, AERBxx-D9 and
Approved backguard kits: AERBxx-D3, AERBxx-D9 and
AERBxx-D24 (xx = range width, last digit(s) = backguard height).
Install the Anti-Tip Bracket and Foot
1. Locate the anti-tip bracket included in the parts box.
2. Install the anti-tip bracket on the floor using the four (4)
2. Install the anti-tip bracket on the floor using the four (4)
included screws. The mounting location varies according to
the model. See the diagram below for location.
ANTI-TIP BRACKET PLACEMENT
Dimension
ER36D
ER48D
J
7 1/2” (19.1 cm)
19” (48.3 cm)
K
6 1/2” (16.5 cm)
6 1/4” (15.9 cm)
K
Range
right side
panel
Back of
range
Top view
Bracket
J