Maytag MEDC415EW Handbuch

Seite von 28
5
CONTROL PANEL & FEATURES
TEMPERATURE/FABRIC
Select a drying temperature based on the fabrics in your load.  
If you are unsure of the temperature to select for a load, select 
the lower setting rather than the higher setting.
CYCLE KNOB
Use Cycle Knob to select available cycles on your dryer. Turn 
the knob to select a cycle for your laundry load. See Cycle 
Guide for detailed descriptions of cycles.
TIMED DRY
 
Will run the dryer for the specified time on the control.  
On models with a selectable temperature knob, you may 
choose a setting based on the fabrics in your load. On  
some models, temperature is included in the cycle 
selections. Drying time and temperature will depend on  
your dryer model.
SENSOR DRY/AUTOMATIC DRY
 
Senses moisture in the load or air temperature and shuts  
off when the load reaches the selected dryness level.  
Gives the best drying in the shortest time. Drying time 
will vary based on fabric type, load size, and temperature 
setting.
1
2
3
WRINKLE CONTROL Feature (on some models)
 
The WRINKLE CONTROL feature will run after your drying 
cycle is complete. It periodically starts and stops the dryer, 
tumbling the load without heat to help avoid wrinkling.
On some models, WRINKLE CONTROL automatically 
starts at the end of the cycle. Opening the door will stop 
this feature.
NOTE: A signal will sound periodically when the WRINKLE 
CONTROL setting is selected, but only if the End of Cycle 
signal is also selected.
WRINKLE CONTROL option (on some models)
When you are unable to remove a load of clothes from the 
dryer as soon as it stops, wrinkles can form. The WRINKLE 
CONTROL option periodically tumbles, rearranges, and fluffs 
the load to help keep wrinkles from forming.
 
Get up to 90 minutes of heat-free, periodic tumbling at 
the end of a cycle. Turn the WRINKLE CONTROL knob 
to select OFF or 90 min. at any time before the cycle has 
ended.
PUSH TO START/END OF CYCLE SIGNAL
The End of Cycle Signal produces an audible sound when the 
drying cycle is finished. Promptly removing clothes at the end 
of the cycle reduces wrinkling.
Turn the END OF CYCLE SIGNAL knob to select the desired 
setting (On or Off). Press the PUSH TO START knob to start 
the dryer.
Not all features and options are available on all models.  
Appearance may vary.
4
4
2
1
4
2
3
1