Kraus KPF2230KSD30SN Installationsanweisungen

Dear Valued Customer,

Kraus would like to take this opportunity 
to thank you for purchasing Kraus 
products. It is our sincere hope that you 
are completely satisfied with your new 
purchase. We welcome any questions or 
comments you may have, and look 
forward to assisting you in the future.
 
Sincerely,
Kraus Customer Service Department.

1   Metal Handle Assembly
2 Locking 

Nut

3 

Ceramic Disc Cartridge

4 

Spout Seal Kit

5  Spout 

Base

6  Spout
7 Hose 

Guide

8 

Hand Spray w/Check Valve

9 Supply 

Pipe-Hot

10 Supply 

Pipe-Cold

11 Supply 

Pipe

12 Screen 

Washer

13 Mounting 

Hardware

14  Hose Adaptor Assembly
15   Cover Plate & Putty Plate
16 Weight
17  Hex Wrench(H2.5 * 19 mm L * 53 mm L)
18  Supply Hose

2.

2.

1.

1.

3.

3.

13.

13.

14.

14.

4.

4.

8.

8.

7.

7.

16.

16.

17.

17.

6.

6.

5.

5.

18.

18.

12.

12.

15.

15.

11.

11.

10.

10.

9.

9.

Adjustable wrench

Pipe  tape

Groove joint plier

Phillips screwdriver

If you've followed the instructions carefully and your faucet still does not work properly, take these corrective steps.

Check to make sure you have the following parts indicated below: 

Leakage under the handle.

Adjusting ring or cap has come loose.

Tighten the adjusting ring or cap. 

Aerator leaks or has an inconsistent 
water flow pattern.

Aerator is dirty or misfitted. 
  

Unscrew the aerator to  check rubber packing
or replace the aerator.

Water will not shut off completely.

Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these 
will dull the finish and void your warranty.

Your new faucet is designed for years of trouble-free performance.
Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these 
will dull the finish and void your warranty.

Shut off main water supply before installation.

Model

Hex wrench 

Dirty or worn out plastic washer in the
cartridge.

Remove the handle and the cartridge to check if the ceramic 
dish is dirty or permanently damaged. 

Keep this manual for ordering replacement parts.

 Silicone Sealant

The fittings should be installed by a licensed plumber.

After installing faucet, remove pull-down spray and 
turn on water to remove any left over debris. 
Re-assemble spout.

Remove preassembled mounting hardware 
from faucet

Tighten supply hose ends to faucet shank and water 
supply source.Note: Hand tighten the supply hose and 
then tighten 1/4 turn with adjustable wrench. 
Overtightening the supply hose can cause leaking. 
Purchase flexible supplies or bull-nose risers separately.

Open the water valve and check for leaks 
at supply line connection.

Position the cover plate and putty plate onto 
the sink, apply clear silicone sealant to putty 
plate. Install faucet body through top of sink. 
From underneath sink place mounting 
hardware and tighten with mounting nut.

Attach metal weight to hose to prevent 
hose from twisting and returns hose to 
proper position.

KRAUS is proud to offer its customers the strongest, most durable 
c e r a m i c  c a r t r i d g e s  i n  a l l  s o l i d  b r a s s  K i t c h e n  F a u c e t s  i t 
manufactures. KRAUS guarantees all of our products to be free of 
defect in materials and craftsmanship. All KRAUS BRAND Kitchen 
Faucets carry a limited lifetime warranty from the original date of 
purchase.
 
If a product fails due to defect in material or craftsmanship during 
the warranty period, KRAUS will repair or replace the items at our 
sole discretion. Warranty does not apply when the item has been 
tampered with, misused, improperly installed, altered, or damaged 
due to abuse or accident. Proof of purchase (original sales receipt) 
must be provided to KRAUS for all warranty claims. Please contact 
one of our representatives if you need any additional details.

All KRAUS products must be installed by a licensed professional 
plumber or contractor to avoid any improper use or installation.
 
IN NO EVENT SHALL KRAUS BE LIABLE FOR ANY INCIDENTAL, 
CONSEQUENTIAL OR SPECIAL DAMAGES, INSTALLATION 
COST, LABOR, TRAVEL TIME, FREIGHT COSTS INCURRED, LOST 
PROFITS, OR CONTINGENT LIABILITIES.
 
KRAUS USA Inc. makes no representation that its products 
comply with any or all local building or plumbing codes. It is the 
consumer’s responsibility to determine local code compliance.
 
This warranty extends to the original purchaser and first 
consumer.

Plastic Seal Cover

Remove the plastic seal cover from the outlet port 
prior to pushing the hose adapter onto the same 
port, you will hear a "click" sound once they are 
joined.

  

• Cover your drain to avoid losing parts.
• When installing flexible hose, Please notice: there should be no torsion or deformation ; do not fold into 
   Shape V or L; do not use if there is any crack or deformation.  

AB1953 Compliant