Maytag MGDB855DC Benutzeranleitung

6

OPTIONS 

Use to select available options for your dryer. Not all cycles 

and options are available on all models.

Energy Saver

Activate the ENERGY SAVER setting to increase your 

energy savings. This setting uses a lower heat level and 

extends cycle time. Turn on for optimal energy savings. 

Turn off for optimal cycle times. ENERGY SAVER will 

default on for Normal.
NOTE: Energy savings is not available on all cycles and 

may vary across loads and cycles.
Static Reduce (on some models)

Touch to add the Static Reduce option to selected Sensor 

cycles (see “Cycle Guide”). The dryer will automatically 

tumble, pause, and introduce a small amount of moisture 

into the load to help reduce static. This option adds 

approximately 8 minutes to the total cycle time.
Damp Dry Signal

Touch to select the Damp Dry Signal to Low, High, or 

Off. When selected, a series of beeps will sound when 

the load is damp, but not completely dry. This will allow 

you to take clothes out of the load that do not need to dry 

completely. This option is not available on Sanitize, Steam 

Refresh, and the Timed Dry cycles.
Audio Level

Touch AUDIO LEVEL to change end beep and button 

sounds simultaneously to Low, High, or Off.

6

CYCLE STATUS LIGHTS

The indicator bar on the right side of the control will let you 

know what stage of the drying cycle is in process. For more 

information on each stage, see “Cycle Status Indicators.”

Sensing

The Sensing indicator will light during Sensor Cycles 

to indicate that the moisture sensor on the dryer is 

operating. This indicator will not light during Timed 

Cycles or options such as Wrinkle Prevent.
Check Vent

The Check Vent indicator will light if there is a blocked 

vent or low airflow.
Good Airflow

This indicator will light if there is no major vent 

blockage.
Steam

This indicator will light when a steam function is 

active.
NOTE: Steam is not available on all models or  

on all cycles.
Done

This will indicate that the selected cycle has ended 

and the load may be removed from the dryer. If 

Wrinkle Prevent has been selected, the dryer may 

continue to tumble the load, even if the Done 

indicator is lit.
Check Lint Screen

The Check Lint Screen indicator light will flash as a 

reminder to clean the lint screen. It will flash until the 

door is opened or a cycle is started. It will turn off 

when the dryer is turned off.

7