Maytag MGDB755DW Installationsanweisungen

NOTE: Two people may be needed to reinstall door.
Insert screws into the bottom holes on left side of dryer 

cabinet. Tighten screws halfway. Position door so large  

end of door hinge slot is over screws. Slide door up so  

screws are in bottom of slots. Tighten screws. Insert  

and tighten top screws in hinges.

Use a small, flat-blade screwdriver to gently remove 4 hinge 

hole plugs on left side of dryer cabinet. Transfer plugs into 

hinge holes on opposite side of dryer cabinet.

Remove door strike and door strike plug from dryer cabinet. 

Insert the door strike into door strike plug hole and secure 

with screw. Insert door strike plug into original door strike 

hole and secure with screw.

Door strike plug

Door strike

Close door and check that door strike aligns with door  

catch. If it is needed, slide door catch left or right within  

slot to adjust alignment.

See the Use and Care Guide or visit our website and 

reference Frequently Asked Questions to possibly avoid  

the cost of a service call.