Frigidaire FGGF3058RF Benutzeranleitung

9

(some models)

Some models are equipped with a special oven rack 

system that automatically partially extends the oven rack 

from the interior oven glides to assist in easier access to 

your food items. This feature works whenever the oven 

door is opened or closed.

1.  Locate all required parts. You will need the supplied 

oven rack (Effortless™  Oven Rack is a flat rack with 

a special dark coating on the left and right rack 

sides) and the 2 supplied chrome connector arms.

2.  Open the oven door. Be sure the oven is completely 

cool before proceeding.

3.  Place the oven rack in positions 2, 3 or 4 only. Be 

sure the rack connector brackets are at the rear of the 

range and pointing towards oven bottom (See Fig. 2).

4.  Assemble one connector arm at a time. With the 

oven door open and the oven rack in place, install 

one end of the connector arm to the hole in the door 

connector bracket (Fig. 1) and the other end in the 

hole in the rack connector bracket (Fig. 2 and as 

in Fig. 3). The oven rack may need to be adjusted in 

or out in the rack position to match the length of the 

connector arm. 

5.  While holding the connector arm in place, twist the 

connector arm so the ends of the connector arm point 

upwards (See Figs. 4 & 5). The connector arm should 

now be locked into position.

6.  Repeat steps 4 and 5 for the other connector arm.

7.  Once both connector arms are properly in place, be 

sure to test the oven rack operation by gently closing 

the oven door. The oven rack should move in and out 

of the oven freely when the door is opened or closed.

Fig. 6 - Effortless™ Oven Rack after assembly

left and right

door connector

brackets

with connector arm ends 

shown in locked  position

(pointing upwards)

connector

arm

connector

arm

door con-

nector

bracket

rack connector

bracket

connector

arm

connector

arm

open oven 

door

Fig. 3 - assembly 

of the Effortless™ 

Oven Rack

be used in oven rack position 2. Placing ANY other 

rack in oven rack position 2 will prevent the oven 

door from fully closing and may damage the oven 

door, oven cavity or the door connector brackets.

•  If the rack system is not assembled with the connector 

arms the Effortless™ Oven rack may be used in oven 

rack positions 2 thru 6. Do not attempt to use the 

Effortless™ Oven rack in rack position 1.

Never pick up hot oven rack parts. Make sure the 

oven and oven racks are COMPLETELY cool and safe to 

touch before attempting to assemble or disassemble the 

Effortless™ Oven Rack.

starting a self-clean cycle. If the oven racks are left 

in the oven during self-clean, the glide ability of the 

Effortless™ Oven Rack system will be damaged and will 

cause oven racks to loose their shiny finish. Remove ALL 

oven racks and clean according to instructions provided 

in the Care & Cleaning section of this manual.

oven

rack