Frigidaire FGEF3035R Benutzeranleitung

16

When the appliance is first plugged in or when the 

power supply to the appliance has been interrupted, the 

display will flash “12:00”. It is recommended to always 

set the clock for the correct time of day before using the 

appliance.

1. Press 

 once (do not hold pad down). 

2.  Within 5 seconds, press and hold the   or  until 

the correct time of day appears in the display.

The electronic oven control is set to display in °F 

(Fahrenheit) when shipped from the factory. The oven can 

be programmed for any temperature from 170°F to 550°F 

(77°C to 287°C).

or Self-clean when setting this feature):
1. Press 

 . “— —” appears in the display.

2.  Press and hold the   until “HI” appears in the display.
3.  Press and hold 

 until °F or °C appears in the 

display.

4.  Press the   or   to change °F to °C or °C to °F.

5.  Press any control pad to return to normal operating 

mode.

When choosing a function, a beep will be heard each time 

a pad is pressed. If desired, the control can be programmed 

for silent operation. Press and hold 

. After 7 seconds, 

the control will beep once. This will block the controls from 

sounding when a pad is pressed. To return the sound, press 

and hold 

 again for 7 seconds until the control beeps 

once.

The oven control has a built-in 12-Hour Energy Saving 

feature that will shut off the oven if the control is left on 

for more than 11 hours and 59 minutes. The oven can 

be programmed to override this feature for continuous 

baking.

1.  Press and hold 

 down for 5 seconds until a 

tone sounds, “ — — hr” will appear in display for 

continuous cooking. The current time of day will return 

to the display.

2.  To cancel the continuous bake setting, press 

 

and hold for 5 seconds until a tone sounds.

 “12hr” will appear in display indicating that the 

control has returned to the 12-Hour Energy Saving 

feature.

The time of day cannot be changed when the oven or 

self-clean is active.

The temperature display feature cannot be changed 

when the oven or self-clean is active.

Changing between continuous bake or the 12-Hour 

Energy saving mode does not change how the cooktop 

controls operate.