Maytag MEDB835DW Installationsanweisungen

You can change your door swing from a right-side opening  

to a left-side opening, if desired. 

1.  Place a towel or soft cloth on top of dryer or work space  

to avoid damaging the surface.

1. Open the dryer door.
2.  Using a T25

®

 screwdriver, remove screws (A) and then (B) 

screws from each of the two hinges that attach dryer door to 

front panel of dryer. Set the hinge screws off to the side for 

reinstalling the door.

3.  Remove the dryer door by lifting upward and out to lift the  

door off the cabinet. Lay the door on a flat, covered surface, 

with the inside of the door facing up. 

5.  Install 2 plastic plugs (A) into screw holes where the hinges 

were removed in Step 4.

1. Remove the door strike (A) from the dryer door opening.
2.  Remove the cosmetic screw (B) opposite the door strike (A).

  

 

 

          A. Door strike 

B. Cosmetic screw

3.    Reinstall the door strike and cosmetic screw on the opposite 

side of dryer door opening from where they were removed.

      

NOTE: Door strike and plugs must be on the same side  

of the dryer door opening.

Min. 8" long TORX T25

® †

 

screwdriver

Flat-blade screwdriver

Plastic putty knife

#2 Phillips screwdriver

  

Remove the 2 plastic plugs (A) located outside the dryer  

door opening.