Whirlpool WFG530S0EW Benutzung Und Pflege

IMPORTANT: The health of some birds is extremely sensitive to the 
fumes given off during the Self-Cleaning cycle. Exposure to the 
fumes may result in death to certain birds. Always move birds to 
another closed and well-ventilated room.
Do not block the oven vent during the Self-Cleaning cycle. Air must 
be able to move freely. See “Oven Vent” section.
Do not clean, rub, damage or move the oven door gasket. 

■

Remove the broiler pan, grid, cookware and bakeware, all 
cooking utensils, oven racks and aluminum foil and, on some 
models, the temperature probe from the oven.

■

Use a damp cloth to clean inside door edge and the 1½" 
(3.8 cm) area around the inside oven cavity frame, being certain 
not to move or bend the gasket.

■

Remove plastic items from the cooktop because they may 
melt.

■

Remove all items from the storage drawer.

IMPORTANT: The heating and cooling of porcelain on steel in the 
oven may result in discoloring, loss of gloss, hairline cracks and 
popping sounds.
Before self-cleaning, make sure the door is completely closed or 
the door will not lock and the self-cleaning cycle will not begin.
Once the oven has completely cooled, remove ash with a damp 
cloth. To avoid breaking the glass, do not apply a cool damp cloth 
to the inner door glass before it has completely cooled.
To stop the self-cleaning cycle at anytime, press the CANCEL 
button on the keypad. If the temperature is too high, the oven door 
will remain locked and “cool” and “locked” will be displayed. The 
cooling fan may continue to run.
Once the cleaning temperature has been reached, the electronic 
control requires a 12-hour delay before another self-clean cycle 
can be started.
The oven light will not function during the self-cleaning cycle.

The SELF CLEAN self-cleaning cycle is time adjustable between 
2 hours 30 minutes and 4 hours 30 minutes in 15-minute 
increments. Suggested clean times are 2 hours 30 minutes for light 
soil, and 4 hours 30 minutes for heavy soil. The last 30 minutes of 
the cycle is for cool down.

1. Press SELF CLEAN.
2. Press the Temp-Time “up” or “down” arrow pads to enter the 

desired self-clean cycle time.

3. Press START.

The oven door will automatically lock. The DOOR LOCKED and 
CLEAN indicator lights will be displayed. The time remaining 
will also be displayed.

4. When the self-clean cycle is complete and the oven cools, the 

DOOR LOCKED and CLEAN indicator lights will turn off.

5. When the oven is completely cooled, remove ash with a damp 

cloth.

IMPORTANT: Before cleaning, make sure all controls are off and 
the oven and cooktop are cool. Always follow label instructions on 
cleaning products. For additional information, you can visit the 
Frequently Asked Questions (FAQs) section of our website at 
www.whirlpool.com. In Canada, reference the Customer Service 
section at www.whirlpool.ca.
Soap, water and a soft cloth or sponge are suggested first unless 
otherwise noted.

 

(on some models)

Food spills containing acids, such as vinegar and tomato, should 
be cleaned as soon as the entire range is cool. These spills may 
affect the finish.
Cleaning Method:

■

Glass cleaner, mild liquid cleaner or nonabrasive scrubbing 
pad: 

 

Gently clean around the model and serial number plate 
because scrubbing may remove numbers.

■

affresh

®

 Kitchen and Appliance Cleaner Part Number 

W10355010 (not included):

 

See the “Accessories” section for more information.

STAINLESS STEEL (on some models)

NOTE: To avoid damage to stainless steel surfaces, do not use 
soap-filled scouring pads, abrasive cleaners, Cooktop Cleaner, 
steel-wool pads, gritty washcloths or abrasive paper towels. 
Damage may occur to stainless steel surfaces, even with one-time 
or limited use.
Cleaning Method:

Rub in direction of grain to avoid damaging.

■

affresh

®

 Stainless Steel Cleaner Part Number W10355016 (not 

included): 

 

See the “Accessories” section for more information.

Liquid detergent or all-purpose cleaner: 

 

Rinse with clean water and dry with soft, lint-free cloth.

METALLIC PAINT (on some models)

Do not use abrasive cleaners, cleaners with bleach, rust removers, 
ammonia or sodium hydroxide (lye) because paint surface may 
stain.