Aten KA9233 Anleitung Für Quick Setup

1

2

3

4

6

1 Combo Graphic Console Module with Stacking Brackets
1 KVM Cable
1 Power Adapter
1 Rack Mount Kit
1 Firmware Upgrade Cable
1 User Manual
1 Quick Start Guide

Consoles
The following equipment must be used for each console:

・A VGA, SVGA, XGA or MultiSync monitor capable of displaying the highest resolution 

provided by any computer in the installation.

・Either a PS/2 or a USB keyboard and mouse.

Computers
The following equipment must be installed on or used for the local computer:

・An HDB-15 video port
・Either a PS/2 style (6 pin mini-DIN) mouse port and PS/2 style keyboard port; or one USB 

port 

Cables
One or more of the following cables are required for use with the KA9233:

・Cat 5 cable  
・KVM Cable - 2L-5202P (PS/2) or  2L-5202U (USB)

5

If you will be connecting a local computer, ensure it is powered off. Make sure that all devices 
you will be connecting up are properly grounded.

1. Connect your monitor and PS/2 or USB keyboard and mouse to the console ports on the 

KA9233. Each port is marked with an identifying icon.

2. (Optional) If you wish to connect a computer to the Local PC port use the provided KVM 

cable. 

3. Use Cat 5 cable to connect the Link port on the KA9233 to a user port on the Matrix KVM 

Switch's rear panel.
Note: Since the data signals are not transmitted in packets, the transmission cannot go 

through network hubs or switches. Passive components such as patch panels, 
keystone jacks, patch cables, etc. can be used to channel the traffic, instead.

4. Connect the power adapter to an AC mains power source appropriate for your model; then, 

connect the power adapter cable to the KA9233. You should hear a long beep, and the LED 
lights on the front panel should illuminate.

5. If you connected a computer to the local PC port, you may turn it on now.

7

For your convenience the Graphical OSD is provided to access the attached computers and 
perform a multitude of administrative tasks with no software to install.

 
The intuitive menus and icons in the Graphical OSD enable users to change account passwords 
and configure their personal profiles. Administrators also can quickly and efficiently manage 
users, groups, stations, and ports; configure network settings; upgrade firmware; and skip and 
scan the ports.

 
1. After powering on the KA9233, the Login screen appears.

Note: If the Login screen is not displayed, press the Local/Remote button on the front panel 

of the KA9233.

2. Enter your username and password, and then click Login. After successfully logging in, the 

Graphical OSD main screen appears.

3. From the Port Status Screen, double-click on a port ID or port note to access an attached 

computer.

4. Press the OSD Hotkey (Scroll Lock + Scroll Lock  or Ctrl + Ctrl) twice to return to the 

Graphical OSD.

8

1

2

3

4

5

4

1

2

3

5

KA9233

KM0832

* All specifications are subject to change without notice.

Computer Connections

1

Console Connections

1

Port Selection

OSD, Hotkey

Connectors

Console Port

Keyboard

1 x USB Type A Female (White)
1 x 6-pin Mini-DIN Female (Purple)

Video

1 x HDB-15 Female (Blue)

Mouse

1 x USB Type A Female (White)
1 x 6-pin Mini-DIN Female (Green)

KVM Port

1 x SPHD-15 Female (Yellow)

Link

1 x RJ-45 Female

F/W Upgrade

1 x 4-conductor 3.5mm Jack

Power

1 x DC Jack

Switches

Local/Remote

1 x Pushbutton

Video Gain Adjustment

2 x Pushbutton

LEDs

Link

1 (Green)

Local

1 (Orange)

Remote

1 (Orange)

Emulation

Keyboard/Mouse

PS/2; USB (PC, Sun, Mac)

Video

1024 x 768 @ 60Hz (300m Max.)

Scan Interval

1-240 Seconds

Power Consumption

DC 5.3V, 6W

Environment

Operating Temp.

0-50˚C

Storage Temp.

-20-60˚C

Humidity

0-80% RH, Non-condensing

Physical Properties

Housing

Metal

Weight

1.20 kg

Dimensions (L x W x H)

16.60 x 21.50 x 4.50 cm

© Copyright 2007 ATEN

®

 International Co., Ltd.

Altusen and the Altusen logo are trademarks of ATEN International Co., Ltd. 
All rights reserved. All other trademarks are the property of their respective owners.

This product is RoHS compliant    

Online Registration
International:
http://support.aten.com
North America:
http://www.aten-usa.com/product_registration 

 

Technical Phone Support
International: 886-2-86926959
North America: 1-888-999-ATEN