Amana AE093G35AX Handbuch

Seite von 24
2
OWNER'S PRODUCT IDENTIFICATION
MODEL NUMBER
SERIAL NUMBER
MANUFACTURING NUMBER
Owner's Name
Address
City
State
Zip
        /        /   
Date of Purchase
Authorized Dealer
Address
City
State
Zip
(       )
Phone Number
To avoid death, personal injury or property
damage due to electrical shock:
•  Observe all local codes and ordinances.
•  Disconnect electrical power to unit before servicing.
•  Ground appliance properly.
•  Check with a qualified electrician if you are not
    sure this appliance is properly grounded.
•  DO NOT ground to gas line.
•  DO NOT ground to cold water pipe if pipe is
    interrupted by plastic, non-metallic gaskets, or
    other insulating (non-conducting) materials.
•  DO NOT modify plug on power cord. If plug
    does not fit electrical outlet, have proper outlet
    installed by qualified electrician.
•  DO NOT have a fuse in the neutral or ground
    circuit. A fuse in the neutral or ground circuit
    could result in an electrical shock.
•  DO NOT use an extension cord with this appliance.
•  DO NOT use an adapter plug with this appliance.
•  DO NOT pinch power cord.
•  DO NOT REMOVE warning tag from power cord.
WARNING
Electrical Requirements
Grounding Instructions
This appliance is equipped with a three-prong grounding plug
for protection against possible shock hazards.  If a two-prong
wall receptacle is encountered, the customer is required to
contact a qualified electrician and have the two-prong wall
WARNING
WARNING
HIGH TEMPERATURE STRESS HAZARD
This room air conditioner is not meant to provide
unattended cooling or life support for persons or
animals that are unable to react to failure of the
product.
The failure of an unattended air conditioner may
result in extreme heat in the conditioned space
causing overheating or death or persons or
animals.
Precautions must be taken to ward off or guard
against such an occurrence.
WARNING
Unpacking
Unpack and visually inspect the unit.  Report any damage to
the delivering carrier immediately.  Remove and discard all
packing material.
Do NOT operate unit with shipping foam
blocks in place.  Always remove prior to
running unit.
WARNING
On some models the air conditioner front and/or mounting kit
hardware may be packed separately.
Record the model, serial and manufacturing numbers of your
unit in the space provided below.  This information is found on
a nameplate visible after the front of the air conditioner has
been removed.  The rated voltage, amperage and capacity for
your specific model can also be found on this nameplate.
Read the warranty packaged with the unit.  Keep the warranty
and a copy of your sales receipt for future reference.  You may
also want to record in the space provided the date purchased
and the selling dealer.