Miele DA5996WSS Installationsanweisungen
Installation
25
a
3 protective installation sheets
for use when installing the chimney
b
1 exhaust connector
for an exhaust duct 6" (150 mm).
c
1 reducer
for an exhaust duct 5" (125 mm).
d
1 non-return flap
for installation in the outlet duct
collar of the motor unit (not for
recirculation mode). Depending on
the device version, the non-return
flap is already mounted.
e
2 protective spacers
for use when fitting the chimney.
f
Wall bracket
for securing the hood on the wall.
g
Recirculation kit for recirculation
mode
contains diverter, aluminum hose
and hose clamps (not contained in
scope of delivery, available as
optional accessory – see "Technical
Data").
8 screws 3/16" x 2 3/8" (5 x 60 mm)
and
8 plugs 5/16" x 2" (8 x 50 mm)
for attaching to the wall (not for use in
USA / CDN).
The screws and plugs are designed
for use in solid walls only.
Use different fasteners for other wall
Use different fasteners for other wall
construction types.
Make sure that the wall can support
Make sure that the wall can support
the load.
2 x M 6 locknuts
for mounting the appliance unit.
2 screws 1/8" x 5/16" (3.9 x 7.5 mm)
are not required.
1 lever
for disassembling the chimney.
Montage
Installation
Montaje
Montaggio
Montering
Montagem
Asennus
Installation sheet