Dacor DYRP48DSNGH Benutzung Und Pflege

8

Setting Up Your Range

Cooktop Assembly

To avoid the chance of fire, explosion or carbon monoxide 

poisoning, do not attempt to use your range without the burners 

completely and properly assembled. The burner rings spread the 

flame evenly around the burner cap. The burner rings must be 

properly seated for proper burner lighting and operation.

SimmerSear Burner Assembly

1.  Put the burner heads in place as shown below. The 

locating tab on the burner head goes in the keyed 

hole as shown.

2.  Put the burner rings on the burner heads. Match the 

tabs on the bottom of the ring to the slots on the 

burner head. Twist each ring back and forth slightly to 

make sure it is properly seated.

3.  Put the burner caps on top of the burner rings. You 

may use either the supplied brass or porcelain caps. 

The ridge around the bottom edge of the cap goes 

around the top of the burner ring.

Standard Burner Assembly

4.  Put the burner rings on the burner bases as shown 

below. The bottom of the burner ring fits inside the 

top of the burner base.

5.  Turn the ring until it drops into place. Twist each ring 

back and forth slightly to make sure it is properly 

seated.

6.  Put either the brass or porcelain burner caps on top of 

the burner rings. The ridge around the bottom edge of 

the cap goes around the top of the burner ring.

SimmerSear 

burners

Keyed hole

Standard 

burners

Burner base

Burner base

Burner ring

Burner ring

Burner head

Tabs

Slots

Step 



Step 



Step 



Step 



Step 



Step 



Ridge on bottom of 

burner cap

Ridge on bottom of 

burner cap

Put locating tab 

into keyed hole