Maytag MGD8100DC Installationsanweisungen

Using a TORX T25

®

 screwdriver, reinstall the latch plate and 

latch backing plate with the 3 TORX

®

 screws removed earlier 

and the hinge assembly with the 5 screws on the opposite 

sides from which they were removed.

Position the door with the inside of the door facing up. 

Reinstall the 10 screws securing the inner door to the  

outer door. 

Using a TORX T25

®

 screwdriver, remove the 4 screws on the 

dryer. Insert the tabs on the hinge into the mounting slot and 

slide down to engage the top tab. Secure in place with  

the 4 TORX T25

®

 screws removed earlier.

Bottom 

of door

Using a TORX T25

®

 screwdriver, remove the 4 screws 

securing the door hinge to the dryer and lift up and out to 

remove the door. Place the door on a soft towel or other  

non-scratch surface. Retain or set aside the 4 screws.