Maytag MED8100D Benutzung Und Pflege

9

Settings and options shown in bold are default settings for that cycle.

If settings are changed, the new settings will be remembered (except on Rapid Dry). If there is a power failure, settings will return to the 

default. 

Not all features and cycles are available on all models.

Not all settings and options are available on each cycle.

Any load 

Timed Dry 

High 40 

Wrinkle Prevent

†

 

Use to dry items to a damp level for items that do  

NOTE: Select Air 

 

Medium 

 

 

not require an entire drying cycle. Select a drying 

Only to dry foam, 

 

Low 

 

 

temperature based on the type of fabrics in your  

rubber, plastic, or 

 

Extra Low 

 

 

load. If you are unsure of the temperature to select 

heat-sensitive 

 

Air Only 

 

 

for a load, select the lower setting rather than the 

fabrics.  

 

 

 

 

higher setting.

Small loads and  

Rapid Dry 

High 26 

Wrinkle Prevent

†

 

For small loads of 3–4 items.   

sportswear  

 

Medium 

 

 

 Low 

 

 

 

Extra Low 

 

 

Air Only

Small loads and  

Air Dry 

 50 

Wrinkle Prevent

†

 

For small loads of 3–4 items.   

sportswear

Items to dry:

Cycle:

Drying  

Temperature:

Default 

Time:

Available 

Options:

Cycle Details:

Settings and options shown in bold are default settings for that cycle.

Not all settings and options are available on each cycle.

Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.

Load Size Recommendations
For best results, follow the load size recommendations noted  

for each cycle. 

Small load: Fill the dryer drum with 3–4 items, not more than 

1/4 full. 

Medium load: Fill the dryer drum up to about 1/2 full. 

Large load: Fill the dryer drum up to about 3/4 full.  

Do not overload. Items need to tumble freely.

Shirts, blouses, 

Refresh 

Medium 22 

Wrinkle Prevent

†

 

Use to reduce light wrinkles from loads left in the 

and slacks 

 

 

 

Reduce Static* 

dryer too long. Do not add dryer sheets.

Items  

to refresh:

Cycle:

Drying 

Temperature:

Default 

Time:

Available 

Options:

Cycle Details:

Adjusting drying time on Timed Cycles

When you select a Timed  

Cycle, the time appears in  

the display. Use + and – to 

increase or decrease the time  

in 1-minute increments. Touch 

and hold to change the time  

in 5-minute increments. 
The maximum dry time is 100 minutes.

Selecting the Drying Temperature

A High heat setting may be used for drying heavyweight items such 

as towels and work clothes.
A Low to Medium heat setting may be used for drying  

medium-weight items such as sheets, blouses, dresses,  

underwear, permanent press fabrics, and some knits.
Use a no heat (air only) setting for foam, rubber, plastic,  

or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for various 

loads, refer to the care label directions.

†

  On steam models, you may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying 

Temperature settings.

†

  On steam models, you may select the “With Steam” setting to add a short steam cycle after 60 minutes. This is available only with High and Medium Drying 

Temperature settings.

*  On steam models only.