Whirlpool XHPC155YBD Installationsanweisungen

Using a 1/4" hex head ratchet or open-end wrench, lower the  

feet approximately 1" (25 mm) away from the bottom of the 

pedestal.

Align the sides of the pedestal so that they are even with the 

sides of the washer/dryer. Reach inside the pedestal opening  

and securely tighten all four pedestal screws.

 Tip the washer/dryer back to its upright position. Remove  

any remaining packaging material. Set the pedestal box aside  

for use if installing another pedestal. Once both the washer  

and dryer have been installed, dispose of/recycle all packaging 

material.

Follow the installation instructions that came with your model  

to finish installing or reinstalling your washer/dryer (i.e., hoses, 

vents, etc.). 
note: Be sure to remove the transport bolts from the back  

of the washer.