Whirlpool WEG730H0DB Benutzeranleitung

First try the solutions suggested here. If you need further assistance or more recommendations that may help you avoid a service call, 
refer to the warranty page in this manual and scan the code there with your mobile device, or visit 

 

http://www.whirlpool.com/product_help. In Canada, visit http://www.whirlpool.ca.
Contact us by mail with any questions or concerns at the address below:
In the U.S.A.:

Whirlpool Brand Home Appliances

 

Customer eXperience Center

 

553 Benson Road

 

Benton Harbor, MI 49022-2692

In Canada:

Whirlpool Brand Home Appliances

 

Customer eXperience Centre

 

200 - 6750 Century Ave.

 

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

Power supply cord is unplugged - Plug into a grounded 3 prong outlet.

ENERGY SAVE is active, and the display is blank - Press any keypad on the control to display the 
Time of Day. See the “Electronic Oven Controls” section for more information.

Household fuse is blown or a circuit breaker is tripped - Replace the fuse or reset the circuit breaker. 
If the problem continues, call an electrician.

Main or regulator gas shutoff valve is in the off position - See the Installation Instructions.

The range is improperly connected to the gas supply - Contact a trained repair specialist or see 
Installation Instructions.

The control knob is not set correctly - Push in knob before turning to a setting.

Air in the gas lines - If this is the first time the surface burners have been used, turn on any one of the 
surface burner knobs to release air from the gas lines.

Clogged burner ports - See “Sealed Surface Burners” section.

Clogged burner ports - See “Sealed Surface Burners” section.

Burner caps positioned improperly - See “Sealed Surface Burners” section.

Range converted improperly - If propane gas is being used, contact a service technician or see 
“Warranty” for contact information.

Cookware and flame are not matched - The cookware should be centered above the burner with the 
bottom sitting level on the grate. The flame should be adjusted so that it does not extend up the sides of 
the pan.

Improper cookware - Ideal cookware should have a flat bottom, straight sides and a well fitting lid, and 
the material should be of a medium to heavy thickness.

Control knob set to incorrect heat level - See “Cooktop Use” section.

Range is not level - Level the range. See the Installation Instructions.