Maytag MHW4300D Benutzeranleitung

12.

ouch and hold START to begin

wash cycle

Touch and hold START to start the wash cycle. To pause

a cycle in progress, touch START once, then touch and

hold again to continue the cycle. To cancel a cycle, touch

POWER/CANCEL.
Once you touch and hold START, you will hear the door lock,

unlock, and lock again. The washer door will remain locked

during the wash cycle.

Unlocking the door to add garments:
If you need to open the door to add 1 or 2

missed garments, you may do so while the

“Add a Garment” light is lit.

Touch START once; the door will unlock

once the washer movement has stopped.

This may take several minutes. Then close

door and touch and hold START again to

restart the cycle.

13.

Remove garments promptly

after cycle is finished

Promptly remove garments after cycle has

completed to avoid odor and rusting of metal

objects on garments. When unloading garments,

pull back the door seal and check for small items

between the tub and the washer drum.
If you will be unable to remove the load promptly,

use the Fresh Hold

or Fresh Spin

™

option

(depending on model). If selected,

the Fresh Hold

option will activate the fan

and tumble the load periodically for up to

12 hours. The Fresh Spin

™

option will tumble

the load periodically for up to 6 hours. To turn

off the Fresh Hold

or Fresh Spin

™

option, touch

POWER/CANCEL. To set the washer so that the Fresh Hold

Fresh Spin

™

option does not come on for future cycles, touch Fresh

Hold

or Fresh Spin

™

option.

NOTE:

The door will remain locked while the Fresh Hold

/Fresh Spin

™

option is active. To cancel the option and unlock the door, touch

POWER/CANCEL.

A small amount of water may remain in the dispensers after the

wash cycle is complete. This is normal.

This washer has a tight seal to avoid water leaks. To avoid odors,

leave the door open to allow the washer to dry between uses.

USING YOUR WASHER